Register Now

apper001 · 08-05-2013, 04:44 AM

am new to 60C packs but recharged now 3x and only put in 1440mah when starting charging at 3.82v??

PS: fixed

apper001 · 08-05-2013, 02:02 PM

Quote:
The default fuel table may be fine. As I mention your 3s experience is not typical and the packs may be underated. If it were me, I'd do a controlled and logged discharge of your 3s packs to find their true capacity. In the mean time, just remember that 3.8v is about 50% for most packs on the market.

Finally, its possible to create a custom fuel map. Again, your 3s packs are more odd than the Revo packs, so if you are going to do it, I would do it with those packs. I don't recommend the custom fuel map as it must deeply discharge your packs and its value is limited.

Greg

08-05-2013, 04:44 AM	#1 (permalink)
apper001 Registered Users Join Date: Mar 2011	diamond 60C 3200 am new to 60C packs but recharged now 3x and only put in 1440mah when starting charging at 3.82v?? PS: fixed Last edited by apper001; 08-05-2013 at 01:00 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-05-2013, 02:02 PM	#2 (permalink)
apper001 Registered Users Thread Starter Join Date: Mar 2011	Quote: The default fuel table may be fine. As I mention your 3s experience is not typical and the packs may be underated. If it were me, I'd do a controlled and logged discharge of your 3s packs to find their true capacity. In the mean time, just remember that 3.8v is about 50% for most packs on the market. Finally, its possible to create a custom fuel map. Again, your 3s packs are more odd than the Revo packs, so if you are going to do it, I would do it with those packs. I don't recommend the custom fuel map as it must deeply discharge your packs and its value is limited. Greg

Register Now

Log-in