START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Zoom/Shogun 400 Electric - Zoom - Shogun 400 Specific Discussion |
|
LinkBack | Thread Tools | Display Modes |
04-30-2005, 06:48 AM | #1 (permalink) |
Join Date: Mar 2005
|
crazy tail servo
hello
I have a problem with my tail servo,itīs gone crazy. When I increase throttle it glitches like crazy. but only throw the gyro..Sow itīs not servo problem. when the gyro is not in contact with the heli everything stops. what can it be? its driving my crazy need help please. thanx |
Sponsored Links | |||
Advertisement |
|
04-30-2005, 08:17 AM | #2 (permalink) |
Join Date: Mar 2005
|
Sounds to me like vibration interfering with the gyro. Are your blades balanced? Do you notice any bad vibes? Also, is the gyro mounted in special vibration dumpening foam?
Wayne. |
04-30-2005, 08:53 AM | #3 (permalink) |
Thread Starter
Join Date: Mar 2005
|
hi. i dont see any bad vibs on it. I guess its got the usual vibs, they stop when head speed is good. blades are balanced, no tracking. I tried using some foam sticked on gyro but still the same.
|
04-30-2005, 12:13 PM | #5 (permalink) |
Thread Starter
Join Date: Mar 2005
|
gyro is piezo 310. i`ve been flying with it for 2 months whith no problem. The guy at the shop told be it was my brushed engine, but now i`ve put on a hacker b20 15l and have the same problem. thanx for those quick replies.
|
04-30-2005, 05:49 PM | #6 (permalink) |
Join Date: Mar 2005
|
is your gyro close to your esc? some have reported interference if too close. try moving the gyro as far away from the esc as possible.
wayne. |
05-01-2005, 04:52 AM | #7 (permalink) |
Registered Users
Join Date: Dec 2004
|
Mine does the same thing. do you have the tail servo and gyro mount? If not order that, and the diy tail pushrod kit. It really calms the tail down by getting rid of all that slop. The tail control on the shogun is crappy stock but the upgrades that are available really stiffen it up. I ordered mine from Mjp carbon.
|
Thread Tools | |
Display Modes | |
|
|