Register Now

Sgt_BF_Gunner · 02-11-2010, 07:07 PM

OK, I know there are the SE Side Engine Mounts... But what is the SE Center Engine Mount needed for, isn't there already a metal block there?

Helico-pteron · 02-11-2010, 07:53 PM

The SE center block is longer which creates more support for the motor which dampens any excessive vibrations from the motor.

This is the stock center block

and the SE block

Probably a good upgrade for you, you have the SX right?

Sgt_BF_Gunner · 02-11-2010, 08:18 PM

Wow, OK I see the bolt holes now... quite a difference in parts.
To be honest, I haven't even opened the kit yet. So far I have the kit with metal blade holders, the OS 91SZ-H PS, an SE hub and a Canomod Halfbloodz. Next will likely be a 3 pack of DS8717's...

Still a little hesitant about building something so not "everyday". was looking for something different from the crowd and this is definitely it. I just hope she's a solid and as low maintenance as I've read.

Helico-pteron · 02-11-2010, 09:34 PM

8717s are crazy in the N9, be sure to use heavy duty metal arms.

Kevin Dalrymple · 02-21-2010, 10:40 PM

look at this link for info about the SE center block.
http://rc.runryder.com/helicopter/t4...E+center+block

Helico-pteron · 02-24-2010, 06:32 AM

That's the problem with Synergy, any info you need is more than 2yrs old.

steffgiguere · 02-24-2010, 07:21 AM

You could also e-mail Matt Botos directly from his web site www.mattbotos.com

02-11-2010, 07:07 PM	#1 (permalink)
Sgt_BF_Gunner Registered Users Join Date: Aug 2006 Location: Hernando, Florida	SE Synergy Parts... OK, I know there are the SE Side Engine Mounts... But what is the SE Center Engine Mount needed for, isn't there already a metal block there? __________________ Nano CPX / mCPX v2 / mCPX BL / 120 SR / 180 CFX / 300 X / 300 CFX / 360 CFX / T-Rex 470L Dominator / T-Rex 500L Dominator / Goblin RAW 420 / GooSky S1 / GooSkyS2 / Spektrum DX9

02-11-2010, 08:18 PM	#3 (permalink)
Sgt_BF_Gunner Registered Users Thread Starter Join Date: Aug 2006 Location: Hernando, Florida	Wow, OK I see the bolt holes now... quite a difference in parts. To be honest, I haven't even opened the kit yet. So far I have the kit with metal blade holders, the OS 91SZ-H PS, an SE hub and a Canomod Halfbloodz. Next will likely be a 3 pack of DS8717's... Still a little hesitant about building something so not "everyday". was looking for something different from the crowd and this is definitely it. I just hope she's a solid and as low maintenance as I've read. __________________ Nano CPX / mCPX v2 / mCPX BL / 120 SR / 180 CFX / 300 X / 300 CFX / 360 CFX / T-Rex 470L Dominator / T-Rex 500L Dominator / Goblin RAW 420 / GooSky S1 / GooSkyS2 / Spektrum DX9

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-11-2010, 07:53 PM	#2 (permalink)
Helico-pteron Registered Users My HF Map location Join Date: Sep 2008	The SE center block is longer which creates more support for the motor which dampens any excessive vibrations from the motor. This is the stock center block and the SE block Probably a good upgrade for you, you have the SX right?

02-11-2010, 09:34 PM	#4 (permalink)
Helico-pteron Registered Users My HF Map location Join Date: Sep 2008	8717s are crazy in the N9, be sure to use heavy duty metal arms.

02-21-2010, 10:40 PM	#5 (permalink)
Kevin Dalrymple Registered Users Join Date: Jul 2006	look at this link for info about the SE center block. http://rc.runryder.com/helicopter/t4...E+center+block

02-24-2010, 06:32 AM	#6 (permalink)
Helico-pteron Registered Users My HF Map location Join Date: Sep 2008	That's the problem with Synergy, any info you need is more than 2yrs old.

02-24-2010, 07:21 AM	#7 (permalink)
steffgiguere Banned User Join Date: Oct 2007	You could also e-mail Matt Botos directly from his web site www.mattbotos.com

Register Now

Log-in