START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
nano CP X Brushless Mods Blade nano CP X Brushless Mods Information and Help |
|
LinkBack | Thread Tools | Display Modes |
05-26-2014, 01:13 AM | #1 (permalink) |
Registered Users
Join Date: Jan 2013
|
Oh no! White smoke!
I have a mild bl, built by Dylan, I bought off the forum last year. Today I went out plugged in the battery, and white smoke came from under the canopy. When I unplugged the battery it was hot and the connector came off. The esc doesn't make any sounds but the tail motor still turns on. Did the esc burn up or just a connection?
__________________
Fusion 360 Fusion 550 |
Sponsored Links | |||
Advertisement |
|
05-27-2014, 07:57 AM | #2 (permalink) |
Registered Users
Join Date: Mar 2011
|
Hopefully your battery wires where they solder to the connector shorted causing the connector to de-solder itself. I would pitch that battery. Check the ESC for visible signs of damage along with all the associated wiring. If nothing looks damaged, solder on a new connnector, cross your fingers and plug in another battery.
__________________
Team Newb pilot All my helis and quads were lost in a tragic boating accident. |
05-27-2014, 05:01 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2013
|
Middle two fets are scorched on the esc. I don't have the tools or skills to solder on something this small. Does megasmicros do work on these.
__________________
Fusion 360 Fusion 550 |
Thread Tools | |
Display Modes | |
|
|