Show us your Quick of Japan!

[PAS]

The Quick of Japan line of Helicopters is definitely an underdog.
Hopefully this thread will help gain interest in these well made and nice flying machines.
Here are a few quick snapshots (sorry I am no photographer) of my QJ EP-8v2 SP.
I am running 6 cells with a Hyperion Titan 50 ESC driving a High End Technology Typhoon 600-34 motor.
The only negatives I have on the EP-8 are the stock landing gear and the canopy.
Both easily replaced as you can see.

[qjheli]

New body! will have them painted soon.

[Henry]

I like that canopy!

[qjheli]

I know theres more out there.

[aironman]

And a couple more.

[aironman]

QUICK EP 16

[PAS]

aironman - Can you post some details on your EP16 like motor, batteries, servos, etc?
Thanks!
-Paul

[aironman]

AXI-2826/10 , PHONIX ICE 75 (BEC DISABLED) , CASTLE CREATION PRO BEC ,
17 TOOTH PINION , HS-85 MG ON CYCLIC AND FUTABA 401 GYRO WITH MATCHING 9254 SERVO FOR TAIL CONTROL AND RUNNING ON 4900 MA 4S1P
LI-PO.

[PAS]

Thanks for the details aironman.
It seems that most helicopters this size go with an 8S.
Is the performance pretty good with a 4S battery?
How long are your flights?
-Paul

[aironman]

Thanks for asking Paul , That set-up was used on it;s maiden flight. I always experiment when it comes to setting up the helicopter. At one time I lost one of my tail rotor due to too much head spead. This maiden flight somehow extended to 11 min. I will try to run a few different set ups that would involved a parallel and series on batteries. I have a cc high voltage speed controller that I plan to use a 14 tooth and like you said 8s or 10s
Thanks Aironman

[aironman]

QJ-16 AND QJ-8 IN ACTION very tight backyard..

[qjheli]

Here is my EP-8EX with the longer tail boom.
Harold is flying it.