Helijive & Scorpion LE motor, Spool up too slow when coming out of Throtle Hold

[KingJoe]

I programed the Helijive with stick programing, #1 & #4

I wanted to test, so I had it on the ground, and went into throtle hold, when I can out of throtle hold, I was surprised how slowly it spooled up.

If I wanted to abort a auto, I would definetly be in trouble.

I have a program disc, I have never used it, but is there a way for the HeliJive to spool up faster?

Thanks

[dl7uae]

Sounds like you did not program an agreed throttle value for AR bailout.

Tom

[KingJoe]

I am sure I must not have.
Could you provide a link or additional info on how to do this
Thanks

[Magneto]

Heres a link on bailout https://www.helifreak.com/showthread...=bailout+setup Its probably best to enable KSA if its a 4525LE.

[KingJoe]

That helps.
I did not program mode 4 correctly.

New Question,
What is
"KSA"

Thanks

[jhheli]

Originally Posted by KingJoe

That helps.
I did not program mode 4 correctly.

New Question,
What is
"KSA"

Thanks

Kontronik Special Application, it is used for some motors that could not operate efficiently, so you can program KSA in conjunction with another mode. for instance you can program mode 1 (reset),4 (helimode+bailout and 9 (KSA).

[KingJoe]

Thanks

New Question:

Scorpion 4525LE
HeliJive 120 v11

What should I program for this motor, and how do I program KSA and are there other things I need to know?

I stumble when it comes to these type of things.

Thanks for your paitience.

[Magneto]

Add mode 9 to your programming KSA is recomended for the 4525 LE to prevent a shutdown.

[jhheli]

Originally Posted by Magneto

Add mode 9 to your programming KSA is recomended for the 4525 LE to prevent a shutdown.

+1

In the link Magneto posted just follow them to program mode 1 and 4 as it says and then program mode 9 the same way you program mode 1, only difference is you have to wait for 9 beeps.

[KingJoe]

Thanks
Got it now.

[Stolla]

If you have the 4525 ultimate dont use ksa, its yy winding no need