Register Now

mickeybling · 04-10-2013, 12:58 PM

hi my gt5 has started the boot up process then freezes when it gets to ailer on the screen can any one help please

Laurens · 04-13-2013, 04:18 AM

Are your servo's ok?

HeliDet · 04-16-2013, 10:26 PM

Mine sometimes hangs during boot after going through all channels it shows "err_3994" (don't remember the correct number) instead of the bar graph. Leaving it sitting for a bit and powering it up again has worked so far and luckily it doesn't do that during flight (knock on wood). I searched the internet but seems like I am the only one with those weird boot error numbers.

A different GT5 that seemed to freeze was on one of my gasser helis when I had a loose wire on the BEC (broke of the circuit board and still had some contact). Funny thing was the display on the GT5 was still lit but frozen. No indication on the high or low voltage display, just frozen.

04-10-2013, 12:58 PM	#1 (permalink)
mickeybling Registered Users Join Date: Jan 2007	gt5 freezes hi my gt5 has started the boot up process then freezes when it gets to ailer on the screen can any one help please __________________ mickeybling

04-13-2013, 04:18 AM	#2 (permalink)
Laurens Registered Users My HF Map location Join Date: Apr 2004	Are your servo's ok? __________________ Logo 800/Jeti DS16

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-16-2013, 10:26 PM	#3 (permalink)
HeliDet Registered Users Join Date: May 2011	Mine sometimes hangs during boot after going through all channels it shows "err_3994" (don't remember the correct number) instead of the bar graph. Leaving it sitting for a bit and powering it up again has worked so far and luckily it doesn't do that during flight (knock on wood). I searched the internet but seems like I am the only one with those weird boot error numbers. A different GT5 that seemed to freeze was on one of my gasser helis when I had a loose wire on the BEC (broke of the circuit board and still had some contact). Funny thing was the display on the GT5 was still lit but frozen. No indication on the high or low voltage display, just frozen.

Register Now

Log-in