START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Titan X50E Thunder Tiger Titan X50E Helicopters |
|
LinkBack | Thread Tools | Display Modes |
07-03-2012, 06:03 PM | #1 (permalink) |
Registered Users
Join Date: Feb 2008
|
Need help with motor install
Scorpion 4025-890 is being installed and the holes do not line up in the frame for the motor mount...it seems like a spacer is needed like stated in the manual, so have you guys installed yours? I can flip the pinion support upside down and it goes in fine and the pinion can be adjusted but not sure if thats ok to do?
|
Sponsored Links | |||
Advertisement |
|
07-04-2012, 07:54 AM | #2 (permalink) |
Registered Users
Join Date: Mar 2008
|
Raptorzz,
I forgot to mention that you would need that spacer when I posted my setup. I turned the motor support upside down as you mention until I got my motor spacer. I flew it this way for about 4 flights. I think the worse thing that can happen with it this way is to lose the bearing out of the support housing. Charlie |
07-05-2012, 09:25 AM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Feb 2008
|
Sweet! Thanks for the info. Im gonna green loktite the bearing in and roll with it!
|
Thread Tools | |
Display Modes | |
|
|