DX6i & Copilot 2 on-off switch

[Windmanquebec]

Hi
I configure my DX6i to be able to set the copilot 2 ON and OFF by using the gyro channel as describe in the instructions.

My question is: now with that set-up I did program the selection switch for the gyro to be the FLAP/GYRO toggle switch. I had the choice between that one and the GEAR/FLIGHT MODE in the DX6i menu, but I use the GEAR/FLIGHT MODE switch for my IU mode. The thing is that I don't find the FLAP/GYRO switch at a easy location to be toggle ON or OFF without my finger leaving one of the two stick. A good location for an easy toggling would be the RUDDER DUAL RATE switch. Is there anyway I can use that switch to control the Copilot ON-OFF mode?

Thanks

[n6nev]

this might help?
https://www.helifreak.com/showthread...dx6i+gear+gyro

[Windmanquebec]

Originally Posted by n6nev

this might help?
https://www.helifreak.com/showthread...dx6i+gear+gyro

Maybe I miss explain myself.. I'm french so let say it that way.

I have control on my co-pilot using the flap-gyro switch because I set it this way instead of using the gear-f.mode switch. I was just wondering if there is another way that the on-off copilot be activated with the Rudder-d/r switch instead.