Ufly with Honeybee fpv2 blades

[js349]

Originally Posted by 3d-wanna-b

They should work for all unless they made some Ufly blades different... or maybe his blades might have gotten mixed up in packaging and he got a set of v1 instead of v2 or then again they could have changed the HB v2 blades.

I ordered them from here: http://www.hobby-wing.com/000189.html. It says they are V2 blades.

[3d-wanna-b]

Originally Posted by js349

I ordered them from here: http://www.hobby-wing.com/000189.html. It says they are V2 blades.

Measure the hole in the blades and measure the hole in the Ufly blades.. I removed a stock blade from mine and popped out the little grommit and measured with my calipers and it is exactly 5mm. It be nice if cruzroy could measure the hole in the blades he is using to compare..

[js349]

Originally Posted by 3d-wanna-b

Measure the hole in the blades and measure the hole in the Ufly blades.. I removed a stock blade from mine and popped out the little grommit and measured with my calipers and it is exactly 5mm. It be nice if cruzroy could measure the hole in the blades he is using to compare..

Yep, originals are 5mm, the HBFPs are approx. 5.5mm.

[cruzroy]

hi guys my buddy works at a machine shop and let me use his digital calipers...
honey bee fp v2 5.22 mm i.d.
walkera ufly 5.44 mm i.d.
walkera grommet 5.17 mm o.d. the grommet should fit in any one mine where tight, lay blades on flat surface and push flat to push in...i used a dime on the flat...hope this helps
i took a pic but its not clear

[js349]

Originally Posted by cruzroy

hi guys my buddy works at a machine shop and let me use his digital calipers...
honey bee fp v2 5.22 mm i.d.
walkera ufly 5.44 mm i.d.
walkera grommet 5.17 mm o.d. the grommet should fit in any one mine where tight, lay blades on flat surface and push flat to push in...i used a dime on the flat...hope this helps
i took a pic but its not clear

That's just the opposite of mine so I don't get it.

[cruzroy]

maybe the blades have a bad tolerances during molding process