Velocity 90 NON Build Thread

[RotaryBliss]

• Shelf space *__√__*
• Electronics *__√__*
• Engine/pipe *__√__*
• Case of Fuel *__√__*
• Heli ...............*_____*<-- ?

[DominicD]

Arbee !! You didn't get the 3DS !??!

[RotaryBliss]

umm no.. But I dremeled off the align logo from the block and head.. that should increase performance by a few points.. huh?

[Foxden]

Dude, the 90 has a 24 oz tank you won't be needing that header tank, that will lighten it up

I'm liking the antenna tubing, does it come in any other colors and what exactly is it?

[RotaryBliss]

The tubing is Air retract tubing for airplanes, I'm not sure of the colors but the Robart brand which comes in the pink and purple together in the package, and I believe Wurger pointed out that Hobby king had some white/ clearish stuff for sale also. Its much better than heatshrink for sure. I sent in one of my receivers to Horizon for repair and they sent it back with it as a replacement over the antenna for me. So I cant take full credit for the idea. Part # 169 is the stuff I got. 10 feet total, a lifetime supply.. http://www.robart.com/air_systems/access.aspx

Edit: I just scrolled down a little further and they do make it in Orange!

[statton1]

plus 1 like rotory bliss

• Shelf space *__√__*
• Electronics *__√__*
• Engine/pipe *__√__*
• Case of Fuel *__√__* enroute
• Heli ...............*_____*<-- ?

is it almost time??????????????

[Foxden]

Originally Posted by RotaryBliss

The tubing is Air retract tubing for airplanes, I'm not sure of the colors but the Robart brand which comes in the pink and purple together in the package, and I believe Wurger pointed out that Hobby king had some white/ clearish stuff for sale also. Its much better than heatshrink for sure. I sent in one of my receivers to Horizon for repair and they sent it back with it as a replacement over the antenna for me. So I cant take full credit for the idea. Part # 169 is the stuff I got. 10 feet total, a lifetime supply.. http://www.robart.com/air_systems/access.aspx

Edit: I just scrolled down a little further and they do make it in Orange!

Bliss,

Awesome, the LHS in town has the Robart retract stuff in stock, I'll swing by and see what they have, I've tried CA'ing fuel tubing and heat shrink, even used the HS I have with glue and none of it holds up on the antenna, I'll give this stuff a try

[low.level.3d]

Hi whats the discharge rate of those rx packs? cant find any figures.

nrg xprx 2S1P 500mah is what ive got.


are they good for 90size 8.4V setup?



thanks,

cyril

[DominicD]

Discharge rate on a rx pack isn't really a concern. It is going to be MUCH higher than the on board electronics will ever pull.