Register Now

Ah Clem · 03-09-2012, 07:38 PM

Outstanding that you have one in that condition!

The blade grips were getting hard to get quite a while back, and they are completely in tact, in the photo!

billym8228 · 03-10-2012, 06:14 AM

Wat do u want for the tail box and the piece that holds the wire to it.I haven't got to do much to it lately.I need yo break the engine in.it has never been ran. As far as clutch I think ill do wat u did have one machined the ordinal is there its never been used.wat servos and gyro do u suggest?

craigr · 03-10-2012, 08:27 AM

I was thinking 45 shipped. Unless you got something to trade. Hmmm.

billym8228 · 03-10-2012, 09:52 AM

Wat do you need I got quiet a bit of stuff.wat size of main blades do I need?

billym8228 · 03-10-2012, 11:09 AM

Hey even if we don't trade on something ill buy the tail box k.thanks billy

craigr · 03-15-2012, 08:36 AM

I would use the engine that it has as long as its not damaged. Open the case, get some oil in there let it sit for a day or so, get it turning nice. It will probably fire right up. I haven't had any old engines not fire up. As far as servos go I would go with a nice digital. Doesn't need to be super strong or fast for 3D just good quality.

bigdaddyg55 · 04-01-2012, 02:14 PM

I have had this stuff since about 1987...... lol

billym8228 · 04-03-2012, 09:34 PM

Hi yes sir I'm interested.for some reason I can't pm you.my email is billym8228@Hotmail.com could u contact me with price.thanks

billym8228 · 04-07-2012, 08:52 AM

Quote:

Originally Posted by bigdaddyg55

I have had this stuff since about 1987...... lol

Hey goodmorning.Im very interested in the huey if you want to sell or trade it.wat would you want for it? my email is billym8228@hotmail.com and phone number is 1-870-754-5596 thanks.

billym8228 · 04-07-2012, 05:14 PM

Quote:

Originally Posted by bigdaddyg55

I have had this stuff since about 1987...... lol

Hey wat do you want for the Huey u have? I would like to buy it from you.

aaronbru · 04-25-2012, 07:07 AM

Hope you get some parts soon! that thing is gonna be awesome! (bump)

billym8228 · 05-02-2012, 11:15 AM

Yea me to its gonna b nice I hope.

billym8228 · 05-02-2012, 11:16 AM

Me to hope it turns out nice.

heli143 · 12-13-2012, 01:35 PM

bigdaddy,
I have the same huey but a reproduction I got about five years ago.
Unique Models in Dalton GA sells them.
here is a pic of mine when I test flew it last week after converting the mechanics to electric. I also posted a video of the test flight on youtube.

[ame]http://www.youtube.com/watch?v=Ziql_6LPHBQ[/ame]

03-09-2012, 07:38 PM	#21 (permalink)
Ah Clem Registered Users Join Date: Jan 2006	Outstanding that you have one in that condition! The blade grips were getting hard to get quite a while back, and they are completely in tact, in the photo! __________________ KBDD-Team Captain, JR DFA Team Pilot. Forza 450, Forza 600N, Forza 700, Compass 6HV-U, Warp, 7HV,Knight Pro,Knight 3D, Atom, Odin II, 6HV, 3D Plus, Knight 50, Chronos, Velos, Steam 550 and 600, OMP M2 (and anything else I can get my hands on...).

04-01-2012, 02:14 PM	#27 (permalink)
bigdaddyg55 Registered Users Join Date: Jan 2012	UH1B I have had this stuff since about 1987...... lol Attached Thumbnails

04-25-2012, 07:07 AM	#31 (permalink)
aaronbru Registered Users My HF Map location Join Date: Mar 2012	Hope you get some parts soon! that thing is gonna be awesome! (bump) __________________ Helis: Blade 120 SR (duct collector), mCPX V2, 450 3D Transmitters: DX6i, DX5e, 120sr stocky Sim: Phoenix

12-13-2012, 01:35 PM	#34 (permalink)
heli143 Registered Users Join Date: Dec 2009	bigdaddy, I have the same huey but a reproduction I got about five years ago. Unique Models in Dalton GA sells them. here is a pic of mine when I test flew it last week after converting the mechanics to electric. I also posted a video of the test flight on youtube. [ame]http://www.youtube.com/watch?v=Ziql_6LPHBQ[/ame] Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-10-2012, 06:14 AM	#22 (permalink)
billym8228 Registered Users Thread Starter Join Date: May 2009	Wat do u want for the tail box and the piece that holds the wire to it.I haven't got to do much to it lately.I need yo break the engine in.it has never been ran. As far as clutch I think ill do wat u did have one machined the ordinal is there its never been used.wat servos and gyro do u suggest?

03-10-2012, 08:27 AM	#23 (permalink)
craigr Registered Users My HF Map location Join Date: Feb 2009	I was thinking 45 shipped. Unless you got something to trade. Hmmm.

03-10-2012, 09:52 AM	#24 (permalink)
billym8228 Registered Users Thread Starter Join Date: May 2009	Wat do you need I got quiet a bit of stuff.wat size of main blades do I need?

03-10-2012, 11:09 AM	#25 (permalink)
billym8228 Registered Users Thread Starter Join Date: May 2009	Hey even if we don't trade on something ill buy the tail box k.thanks billy

03-15-2012, 08:36 AM	#26 (permalink)
craigr Registered Users My HF Map location Join Date: Feb 2009	I would use the engine that it has as long as its not damaged. Open the case, get some oil in there let it sit for a day or so, get it turning nice. It will probably fire right up. I haven't had any old engines not fire up. As far as servos go I would go with a nice digital. Doesn't need to be super strong or fast for 3D just good quality.

04-03-2012, 09:34 PM	#28 (permalink)
billym8228 Registered Users Thread Starter Join Date: May 2009	Hi yes sir I'm interested.for some reason I can't pm you.my email is billym8228@Hotmail.com could u contact me with price.thanks

05-02-2012, 11:15 AM	#32 (permalink)
billym8228 Registered Users Thread Starter Join Date: May 2009	Yea me to its gonna b nice I hope.

05-02-2012, 11:16 AM	#33 (permalink)
billym8228 Registered Users Thread Starter Join Date: May 2009	Me to hope it turns out nice.

Register Now

Log-in