Register Now

bitsnpieces · 08-10-2012, 10:25 AM

I'm in the process of building a G4 nitro FBL. Up to this point the kit seems to be high quality and the build is going well. I am having a problem mounting the fan to the O.S. Max 105HZR. The fan hits the regulator on the carb before bottoming out on the front bearing. Can anyone shine a little light on how to resolve this issue. Thanks

JamesGreen · 08-12-2012, 12:56 PM

Hi mate, just undo the bolt holding the carb in place, and move the carb slighty. Should fit fine. I have a 105HZ-R in my G4.

James

bitsnpieces · 08-12-2012, 01:41 PM

Thats exactly what I did. Works great. Thanks!

08-10-2012, 10:25 AM	#1 (permalink)
bitsnpieces Registered Users Join Date: Apr 2008	G4 Engine fan mount I'm in the process of building a G4 nitro FBL. Up to this point the kit seems to be high quality and the build is going well. I am having a problem mounting the fan to the O.S. Max 105HZR. The fan hits the regulator on the carb before bottoming out on the front bearing. Can anyone shine a little light on how to resolve this issue. Thanks __________________ TT E720, Logo 600SX, , Goblin 570 Proving the laws of gravity

08-12-2012, 01:41 PM	#3 (permalink)
bitsnpieces Registered Users Thread Starter Join Date: Apr 2008	Thats exactly what I did. Works great. Thanks! __________________ TT E720, Logo 600SX, , Goblin 570 Proving the laws of gravity

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-12-2012, 12:56 PM	#2 (permalink)
JamesGreen Registered Users Join Date: Mar 2008	Hi mate, just undo the bolt holding the carb in place, and move the carb slighty. Should fit fine. I have a 105HZ-R in my G4. James

Register Now

Log-in