servo issue

[Fatam]

Went to run my 3rd pack on my 300x and my tail servo motor went out for no reason. So im assuming the eflight ones are junk. I heard there are some spektrum ones that are good. Any thoughts?

[nartac]

I have no experience with them but a bunch of people use spektrum h3020 servos with good results. The A3020 has same specs as the H3020 but costs only $10 at ampdraw.

[jean-michael]

Me too my tail servo died at the third flight when purchase. I have replaced with the savox 0262 and no problem since. I have over 300 flight with. Horizon hobby have credit me new canopy an replacement because I don't want an other eflight tail servo on my 300x.

[Fatam]

Originally Posted by jean-michael

Me too my tail servo died at the third flight when purchase. I have replaced with the savox 0262 and no problem since. I have over 300 flight with. Horizon hobby have credit me new canopy an replacement because I don't want an other eflight tail servo on my 300x.

sorry guys im so new to this heli stuff. With the savox 0262 what did you have to do with the beast?

[Fatam]

Originally Posted by nartac

I have no experience with them but a bunch of people use spektrum h3020 servos with good results. The A3020 has same specs as the H3020 but costs only $10 at ampdraw.

I have heard good things about the spek A3020, do you have to do any changes with the beast?

[jean-michael]

For the savox 0262 It very easy, you have to reverse F,N. Parameter, and readjust E. And if I well remember reverses the tail in your transmitter. And the rest is the same. Just make bench test without main blade before first flight to check if all the command and gyro is not reverse, and check parameters N if is not invert.

[nartac]

Originally Posted by nartac

I have no experience with them but a bunch of people use spektrum h3020 servos with good results. The A3020 has same specs as the H3020 but costs only $10 at ampdraw.

Sorry I misread your post. You were asking about the tail servo. The mentioned servos are good for cyclic only. The tail servo that I'm using is a Hitec HSG-5084MG servo. Has been reliable for me. If money is no object, I highly suggest an mks ds95i. Another servo that you might consider in getting for about $20-25 is the kst ds215mg/turnnigy tgy-306g. Run them at 6V and they are plenty fast for a tail servo

[Fatam]

Originally Posted by jean-michael

For the savox 0262 It very easy, you have to reverse F,N. Parameter, and readjust E. And if I well remember reverses the tail in your transmitter. And the rest is the same. Just make bench test without main blade before first flight to check if all the command and gyro is not reverse, and check parameters N if is not invert.

Well I went with the savox and all I can say is wow!