VBar 4.0/5.0/Mini/regular/Blueline features

[seemore74]

Originally Posted by MrMel

Please start an own thread next time.

- Are you using buffer pack? 6v on a Jive needs buffer pack.
- I would rather guess static on that heli...

Ok, will start a thread on any issues next time round
Yes i am using the FROMECO DCup plugged in to the Rx B port on the miniV.
If it is static where could that be generated from? the heli has metal boom + torque tube

[MrMel]

With a DCup, Then that log is a normal shutdown, i.e. when you unplugged the main pack and you got a cold start, it's nothing in that log recording from the tail failure.

if it's TT I would say bad servo rather then, or a chafed cable for that matter, or something like that, could even be bad solder on the motherboard on the vbar.

[seemore74]

Thanks, i'll look into that

[oliv]

Does anybody know if it is possible to get the frequency of the vibrations in the logs ?
It would be nice for troubleshooting.

[TheBum]

Originally Posted by oliv

Does anybody know if it is possible to get the frequency of the vibrations in the logs ?
It would be nice for troubleshooting.

Nope, only in the spectrum analyzer. The best way to troubleshoot is to use Bluetooth and hover the heli with the spectrum analyzer running.

[seemore74]

Can anyone tell me if I should use Tx endpionts in order to equalize the pitch range or is there a function in Vstabi for this?

[TheBum]

Originally Posted by seemore74

Can anyone tell me if I should use Tx endpionts in order to equalize the pitch range or is there a function in Vstabi for this?

Pitch channel endpoints. If you go into the VStabi software to the Collective setup tab and read the instructions, you'll see that it's OK.

[seemore74]

Thanks for the reply Bro