Help With Pitch Setting On 4G3

[3d-wanna-b]

Sorry for the dumb question but I'm new to CP helis so I figure it be best to ask before I screw something up. Got a couple questions. I'm in the process of setting up the heli now using the write up Jose posted. I've followed how he said to set up the pitch curve. My pitch curves is as follows:
L - 19.0% = -2 degree, ,
1/4 - ??
1/2 - 30.0% = +2degree
3/4 - ??
H - 52.0% = +10dergee

What should 1/4 stick and 3/4 stick be set at in %??

I have the pitch on one blade set perfect -2, +2, +10 but on the other blade the pitch does not match. How do I go about getting the pitch the same on both blades ? Do I have to adjust the links?? If so is it the long links or the short ones going to the flybar or both?

As for the throttle curve I have it set at 0-25-50-75-100 is this ok or does it need to be changed??

[Silverexpress01]

my prior info presented was deemed inaccurate - I removed it.