Master CP binding process

[BigRich63]

Hello All,

I had a Master CP given to me and I'm wondering if the rx requires it's own bind plug ?And I don't see a port on the rx labeled "Bind". I'm assuming it needs one to bind to the tx. Any help is greatly appreciated

Thanks Big

[watho 46]

Hi Big
A standard bind plug will do as they are all the same
you can use any spare port on the RX
From memory ( been a while) plug bind plug in power heli on and turn your TX on you should see your TX start to flash and then go solid
Unplug heli turn off tx ,remove bind plug, and repower tx and plug heli on should now automaticly
Hope this helps
Cheers Watho

[BigRich63]

Thanks Watho,

I'll give that a try as the manuals are not much help in this area.
Big

[watho 46]

Originally Posted by BigRich63

Thanks Watho,

I'll give that a try as the manuals are not much help in this area.
Big

Hi bigrich
Hope this helps it has been a while since played with the CP
Now the feelings with the manuals not much help down here in auz either
Just keep tring different sequences tx first then rx or vis a versa not sure from memory don't give up lots of fun to be had once you get it lol
Cheers watho