Post your Blade Nano CP X videos here!!

[BladeScraper]

Blade Nano CPX | Spin 13,500Kv (2 min 40 sec)

[motp4tj1]

https://www.dropbox.com/s/qg9w7o4i4d...2023.12.16.mov


JUNEBUG

[motp4tj1]

I RECORDED THE ABOVE VIDEO OF BLADESCRAPER BEASTING ON THE NANO


JUNEBUG

[motp4tj1]

I RECORDED BLADESCRAPER BEASTING ON HIS NANO BL WITH SPIN MOTOR.

https://www.dropbox.com/s/qg9w7o4i4d...2023.12.16.mov


JUNEBUG

[BladeScraper]

Flying my Nano with Spin 13,500Kv

Blade Nano CPX Spin 13,500Kv Hard 3D In Gym (2 min 7 sec)

[BladeScraper]

Blade Nano CPX | Spin 13,500Kv Slow and Low (2 min 39 sec)

[motp4tj1]

https://www.dropbox.com/s/254ule2fhy...2020.42.33.mov

MILD NANO WITH NEW BLADE RELAXING FLIGHT


JUNEBUG

[Dylwad]

Mild V2 kit, 13200KV HP03SPE V2, 7 tooth pinion. MX-3A Blheli 11.2
MH swash, rear ARB
Lynx stretch bullet blades
Lynx 42mm tail blade
Stock 6mm tail motor, stock boom pulled out from the frame and tail mount around 5mm total.
Stock frame, head, grips, main shaft, skids, canopy.
Oversky 200Mah 35C lipo with around 40 flights on it. 3.73 volts resting after the flight
AUW 31 grams RTF with battery

[ame]http://youtu.be/Tg24Jh_ytkA[/ame]

[motp4tj1]

What's throttle curve? Throttle curve and pitch curve have you found gives the punch and less bogging when doing hard 3d?

[Dylwad]

Originally Posted by motp4tj1

What's throttle curve? Throttle curve and pitch curve have you found gives the punch and less bogging when doing hard 3d?

80%flat throttle, 85%pitch travel adjust. The v2 motor and mx3a esc are the key ingredients

[motp4tj1]

MILD BRUSHLESS NANO CP X (2 min 17 sec)

JUNEBUG

[doubletap]

Newbie here... Still learning the curve
Thanks guys!
[ame]http://youtu.be/Itm-WtokSJs[/ame]

[BladeScraper]

Mild V2

Blade Nano CPX Mild Brushless V2 (2 min 55 sec)

[StarMaker]

Nice to know what this little heli is capable of doing. I burly got it two days ago and the left aileron servo just died after a crash. now I have to wait for the servo to get here. I was having so much fun and that happened but I guess that's how you learn from crashing

[daver18qc]

Here's my attempts at making 360 turns with the rudder, i've been practicing for a month flying this nano, i'm just beginning to get it to hover and small movements now.

Thing that's puzzling me is why does it drift forward/back when i rudder turn it ??

Do i just need more and more practice ?
(By the way this is my 2nd heli, first being a msR that i flown about 2 days before getting bored)

NanoCPX Rudder Crash (3 min 48 sec)

[soundmaster]

Here is my actual progress flying the nano cpx BL in my living room. Actually I am working on the Rolls as you can see in the second video.

Nano CPX Brushless Flips and Inverted Hover in LIving Room (2 min 59 sec)

Nano CPX Brushless - Backflip and some Rolls - Indoor - Living Room (1 min 24 sec)

[skurge]

my first video with the CPX, have been flying CP for about 2 months now


this was about a week ago

Nano CPX Fun (1 min 25 sec)

[vtown nick]

Time to wake up the video thread

Got my hands on a nano to play with and it's quite fun!

Adventures of the Nano CPX (2 min 2 sec)

Nano Cpx (2 min 2 sec)

Bone stock with Lynx blades, pretty weak pulse lipo.

[lloydbayliss]

Some bedroom pirouettes...

Haven't quite plucked up the courage to do a circuit around the room yet, but it's close

cPX (2 min 19 sec)

Bog standard, had it just over a month. Had to replace the motor the other day after it seized Put a new stock one in, but I've got the new MMW replacement motor on the shelf ready to go in

[motp4tj1]

Nano CPX UPGRADED with brushed MMW motor and Power whoop connector.

[ame="https://youtu.be/IgTxLaXEpTQ"]NANO CPX UPGRADED - YouTube[/ame]