Register Now

MULIKOW · 11-25-2008, 10:46 PM

Just finished this build. I'll have a longer flight vid avaiable tomorrow

MULIKOW · 11-26-2008, 06:18 PM

indoor flight of the firefox ep200 with the gryo fixed.

FIREFOX EP200 FLIGHT 2.wmv (2 min 20 sec)

Crash400 · 11-30-2008, 04:32 PM

was thinkin bout gettin one of these but its a toss up between this and the sjm 180. the deciding factor is this, how durable is the head on this thing?? looks like its got some plastic parts hangin out far enough that they could get some leverage onto em in a crash. other than that for $100 receiver ready i cant see anything to complain about.

Crash400 · 11-30-2008, 05:57 PM

I also noticed that they only come with plastic frames, where would you get the fiberglass frame upgrade?

commanderclark · 12-20-2008, 12:49 PM

Quote:

Originally Posted by Crash400

I also noticed that they only come with plastic frames, where would you get the fiberglass frame upgrade?

I'm pretty sure i saw some upgraded frame parts somewhere

commanderclark · 12-25-2008, 12:48 PM

Just got mine, and found servos to big for the holes. Few other issues but looking forward to putting it together....

GaryM · 12-28-2008, 11:28 PM

Try www.elemodel.com for fiberglass frames.

I have a FireFox 200 coming from HobbyKing. It ships with servos. Are these servos useable or are they junk? I hear the hxt500/sg5 will not fit without enlarging the existing openings.

Also, I understand the only differences between the FF100 and FF200 are the length of the blades and the boom length. Is this true? Motors aside.
THanks.

MULIKOW · 01-06-2009, 08:23 AM

The servos are okay...however, i wouldnt trust them. ive got 5g servos on mine. Getting the red carbon look frame shortly and will rebuild mine..

bdelmo · 03-11-2009, 02:30 PM

Fire Fox EP200 Micro Helicopter - If it sounds too good of a deal to be true, then it likely is not what you expected.

Cheers:
None!

Jeers:
1. It is only 50% complete as shipped, not 95%.
2. Servo holes must be enlarged to fit servos.
3. Tail is difficult to set up for proper travel.
4. Gyro does not set up easily.
5. Only parts pics are provided and no EP200 manual could be found at ELE or elsewhere.
6. Very difficult to control in flight.
7. Frame broke at tail support, which is poor design, after crash.
8. Parts are very difficult to find anywhere.

pdawg · 05-08-2009, 02:25 AM

What size wrench did you use to tighten the flybar screws at the top of the head assembly? They are smaller than the .05" hex wrench.

Cyberman · 06-06-2009, 05:22 AM

here is my Firefox
http://www.heliforum.cz/index.php?na...article&sid=57

bdelmo · 08-23-2009, 10:50 AM

See my three Ebay postings for used ELE Firefox EP200 Micro Helicopter needing minor repairs, EP200 Parts and EP100/200 Scale Fuselage SC-300 that I relised for sale.

http://cgi.ebay.com/ws/eBayISAPI.dll...STRK:MESELX:IT

http://cgi.ebay.com/ws/eBayISAPI.dll...STRK:MESELX:IT

http://cgi.ebay.com/ws/eBayISAPI.dll...STRK:MESELX:IT

12-28-2008, 11:28 PM	#7 (permalink)
GaryM Registered Users Join Date: Jan 2008	FireFox 200 frame upgrade Try www.elemodel.com for fiberglass frames. I have a FireFox 200 coming from HobbyKing. It ships with servos. Are these servos useable or are they junk? I hear the hxt500/sg5 will not fit without enlarging the existing openings. Also, I understand the only differences between the FF100 and FF200 are the length of the blades and the boom length. Is this true? Motors aside. THanks.

01-06-2009, 08:23 AM	#8 (permalink)
MULIKOW Registered Users Thread Starter Join Date: Jan 2008	ep200 The servos are okay...however, i wouldnt trust them. ive got 5g servos on mine. Getting the red carbon look frame shortly and will rebuild mine..

08-23-2009, 10:50 AM	#12 (permalink)
bdelmo Registered Users Join Date: Jan 2007	ELE Firefox EP200 Micro Helicopter needing minor repairs See my three Ebay postings for used ELE Firefox EP200 Micro Helicopter needing minor repairs, EP200 Parts and EP100/200 Scale Fuselage SC-300 that I relised for sale. http://cgi.ebay.com/ws/eBayISAPI.dll...STRK:MESELX:IT http://cgi.ebay.com/ws/eBayISAPI.dll...STRK:MESELX:IT http://cgi.ebay.com/ws/eBayISAPI.dll...STRK:MESELX:IT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-30-2008, 04:32 PM	#3 (permalink)
Crash400 Registered Users Join Date: Mar 2008	was thinkin bout gettin one of these but its a toss up between this and the sjm 180. the deciding factor is this, how durable is the head on this thing?? looks like its got some plastic parts hangin out far enough that they could get some leverage onto em in a crash. other than that for $100 receiver ready i cant see anything to complain about.

11-30-2008, 05:57 PM	#4 (permalink)
Crash400 Registered Users Join Date: Mar 2008	I also noticed that they only come with plastic frames, where would you get the fiberglass frame upgrade?

12-25-2008, 12:48 PM	#6 (permalink)
commanderclark Join Date: Dec 2008	Just got mine, and found servos to big for the holes. Few other issues but looking forward to putting it together....

03-11-2009, 02:30 PM	#9 (permalink)
bdelmo Registered Users Join Date: Jan 2007	Fire Fox EP200 Micro Helicopter - If it sounds too good of a deal to be true, then it likely is not what you expected. Cheers: None! Jeers: 1. It is only 50% complete as shipped, not 95%. 2. Servo holes must be enlarged to fit servos. 3. Tail is difficult to set up for proper travel. 4. Gyro does not set up easily. 5. Only parts pics are provided and no EP200 manual could be found at ELE or elsewhere. 6. Very difficult to control in flight. 7. Frame broke at tail support, which is poor design, after crash. 8. Parts are very difficult to find anywhere.

05-08-2009, 02:25 AM	#10 (permalink)
pdawg Registered Users Join Date: Dec 2005	What size wrench did you use to tighten the flybar screws at the top of the head assembly? They are smaller than the .05" hex wrench.

06-06-2009, 05:22 AM	#11 (permalink)
Cyberman Join Date: Nov 2007	here is my Firefox http://www.heliforum.cz/index.php?na...article&sid=57

Register Now

Log-in