Idle up mid-stick at 6 degrees! HELP!!

[Trooper11040]

How do I fix this damn bird! Every time I rebuild the head, The pitch is off horribly...how do I get this thing back to 0 degrees at mid-stick in both flight modes!?

[Mojappa]

Watch the CCPM setup 1&2 vids. There is a link in the "Head Disassembly Vid" sticky at the top.

[dannylightning]

Originally Posted by Mojappa

Watch the CCPM setup 1&2 vids. There is a link in the "Head Disassembly Vid" sticky at the top.

yep watch those, center your servo arms, adjust your servo push rods to the correct length so you get no binding at full or low stick in idle up mode and the swash is pretty much centered, and adjust your adjustable ball links than go in to your TX if you have a dx6i or something and make any other adjustments you need to do.

the things i just mentioned are all your really going to need to do to your sr to get it flying right. the video's seem so complicated but there is not all that much to it.