Register Now

flag8r77 · 03-27-2007, 01:32 PM

I am close to purchasing the tower hobby combo deal on the 450 xs...how much build time is expected on the "90 built" heli?
Where do you buy the cheapest wooden replacement blades for this heli?
Thanks.

:?:

fedex · 03-27-2007, 02:37 PM

I don't know, but you should check every screw for loctite, ntm make sure the mechanical setup is perfect.

L0stS0ul · 03-27-2007, 03:26 PM

cheapest replacement blades are probably t-rex 325's

Scottlclem · 03-27-2007, 05:50 PM

It took me about 14 hours or so to get the mx-450 built and set up right, but I could do the same thing now in about 3 or 4 hours . So it depends on your experience and mechanical ability. I would still be trying to figure out the radio setup if hadn't watched finless bob's vid's . There for trex but will help alot even if your experienced at ccpm set up.
http://video.helifreak.com/?subpath=...CPM_Part_1.wmv
http://video.helifreak.com/?subpath=...CPM_Part_2.wmv

03-27-2007, 01:32 PM	#1 (permalink)
flag8r77 Registered Users Join Date: Mar 2007	450 XS Questions I am close to purchasing the tower hobby combo deal on the 450 xs...how much build time is expected on the "90 built" heli? Where do you buy the cheapest wooden replacement blades for this heli? Thanks. :?:

03-27-2007, 05:50 PM	#4 (permalink)
Scottlclem Registered Users Join Date: Feb 2007	build time It took me about 14 hours or so to get the mx-450 built and set up right, but I could do the same thing now in about 3 or 4 hours . So it depends on your experience and mechanical ability. I would still be trying to figure out the radio setup if hadn't watched finless bob's vid's . There for trex but will help alot even if your experienced at ccpm set up. http://video.helifreak.com/?subpath=...CPM_Part_1.wmv http://video.helifreak.com/?subpath=...CPM_Part_2.wmv

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-27-2007, 02:37 PM	#2 (permalink)
fedex Registered Users Join Date: Nov 2006 Location: Georgia\USA	I don't know, but you should check every screw for loctite, ntm make sure the mechanical setup is perfect.

03-27-2007, 03:26 PM	#3 (permalink)
L0stS0ul Registered Users Join Date: Jul 2006	cheapest replacement blades are probably t-rex 325's

Register Now

Log-in