Register Now

jrohland · 05-21-2009, 08:35 AM

I spoke with Howard earlier this week and asked if I could come up there. He said that is fine just call first to make sure he is there.

I have 3 days of advanced RC heli training starting tomorrow. I don't have time to learn all the ins and outs so, I asked Howard if he would help me configure my CPII. He said he will. I'm going to the Oracle boys. Yesss!

nightflyr · 05-21-2009, 08:38 AM

send my regards!! and enjoy!!

DonEmmel · 05-21-2009, 03:35 PM

I've been tempted to ask to visit. I work in Timonium, Md so FMA isn't too far away. Let us know how it goes!

jrohland · 05-21-2009, 08:04 PM

I got there and Howard went through my setup explaining the different options. We got it setup in a few minutes. While testing something was not right. Nathan checked it and said the sensors are not working. We checked and found wires had pulled out of the servo connectors. We got that all fixed and everything tested out. I'll see tomorrow how it works at the club field.

It took about an hour each way to get there and back. It was well worth the trip. They were about to do some testing with Raptor. I wanted to hang out but I needed to beat traffic so I bailed.

If you are near Frederick, MD, they are great folks for one on one support.

nightflyr · 05-21-2009, 08:13 PM

glad to hear you got it ll sorted out!! Happy flying

05-21-2009, 08:35 AM	#1 (permalink)
jrohland HF Support My HF Map location Join Date: May 2006 Location: US, Virgina	Going to FMA Direct today I spoke with Howard earlier this week and asked if I could come up there. He said that is fine just call first to make sure he is there. I have 3 days of advanced RC heli training starting tomorrow. I don't have time to learn all the ins and outs so, I asked Howard if he would help me configure my CPII. He said he will. I'm going to the Oracle boys. Yesss!

05-21-2009, 08:38 AM	#2 (permalink)
nightflyr Registered Users My HF Map location Join Date: Jan 2009 Location: Long Island, NY	send my regards!! and enjoy!! __________________ MSR x1 / mCPX x2 / 450 x4 / Chaos600 test bed / Chaos600 Air-Wolf / American WereWolf 800 / KFrame800/900/1000 / Assorted Fixed Wing JR9303 / JR9503 / Futaba10CHP

05-21-2009, 08:04 PM	#4 (permalink)
jrohland HF Support Thread Starter My HF Map location Join Date: May 2006 Location: US, Virgina	It was great I got there and Howard went through my setup explaining the different options. We got it setup in a few minutes. While testing something was not right. Nathan checked it and said the sensors are not working. We checked and found wires had pulled out of the servo connectors. We got that all fixed and everything tested out. I'll see tomorrow how it works at the club field. It took about an hour each way to get there and back. It was well worth the trip. They were about to do some testing with Raptor. I wanted to hang out but I needed to beat traffic so I bailed. If you are near Frederick, MD, they are great folks for one on one support.

05-21-2009, 08:13 PM	#5 (permalink)
nightflyr Registered Users My HF Map location Join Date: Jan 2009 Location: Long Island, NY	glad to hear you got it ll sorted out!! Happy flying __________________ MSR x1 / mCPX x2 / 450 x4 / Chaos600 test bed / Chaos600 Air-Wolf / American WereWolf 800 / KFrame800/900/1000 / Assorted Fixed Wing JR9303 / JR9503 / Futaba10CHP

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-21-2009, 03:35 PM	#3 (permalink)
DonEmmel Registered Users Join Date: Mar 2009	I've been tempted to ask to visit. I work in Timonium, Md so FMA isn't too far away. Let us know how it goes!

Register Now

Log-in