Register Now

Scott1115 · 03-20-2012, 06:01 PM

I've decided to sell my fly-bared helicopter, it flies soooo well.

-Trex 600N with upgraded metal elevator arm set and pitch/aileron levers and metal tail grips.
-Align/OS 50H with new SS bearings from RC Bearings (as of last night) and new gaskets and new glow plug (OS #8) - no fuel through it yet. There is a chip in the front muffler mount screw hole. It DOES NOT effect the seal of the muffler at all and it DOES NOT effect the performance.
-Align high performance pipe
-Fut S9542's on cyclic controls
-Fut 3151 on throttle
-Fut 520 gyro
-Fut BLS 251 on tail
-CYG ATG governor with back plate sensor
-Align 2 in 1 regulator
-Fut 6008HS receiver
-2 Relion 2600mAh lithium-ion batteries
-2 canopies - original "beater" and clean aftermarket canopy bought at a fun fly (it's been on heli twice)

Cost $1580.00 new,asking $800.00 PP and shipped, which seems to be on par with other 600N's for sale with lesser electronics, mine are better.

Scott1115 · 03-22-2012, 07:45 AM

Scott1115 · 03-23-2012, 06:01 PM

Put 6 lights on the helicopter today. Engine runs great and it flies so well.

Scott1115 · 03-24-2012, 07:32 PM

Come on guys, this heli ROCKS!!! I need to sell to fund a Compass 7HV. Make a fair offer and it is yours.

Scott1115 · 03-25-2012, 04:23 PM

Sorry image quality isn't great - it was very windy and overcast. But you can see it runs and flies great!

Scott1115 · 03-27-2012, 08:07 PM

BUY ME

Scott1115 · 03-31-2012, 10:22 PM

^up top^

Scott1115 · 04-05-2012, 10:32 AM

Scott1115 · 04-07-2012, 09:49 PM

Easter Sunday, may 8th only - $100.00 off!!!!!

$700.00 PP'd and shipped

MrHeliNewbie · 04-08-2012, 10:44 AM

ok that price has me wanting to ask....
I this the belt drive 600N V1 Align..... ( same head and tail setup as the Align 600E V1 )

Scott1115 · 04-08-2012, 01:01 PM

No, its not the same. This has a torque tube, always did. Came from box as a TT. It was the V1 600Nitro pro with upgraded parts to make it an "LE", less the metal grips. I have it priced to sell because i want to fund a Compass 7HV or a Synergy E7.

Scott1115 · 04-10-2012, 08:58 PM

Scott1115 · 04-14-2012, 11:57 AM

weekend bump

Scott1115 · 04-16-2012, 12:24 PM

Now asking $700.00, if not sold I will part out soon.

Need to fund another project.

03-20-2012, 06:01 PM	#1 (permalink)
Scott1115 Registered Users Join Date: Apr 2010	Trex 600N BNF I've decided to sell my fly-bared helicopter, it flies soooo well. -Trex 600N with upgraded metal elevator arm set and pitch/aileron levers and metal tail grips. -Align/OS 50H with new SS bearings from RC Bearings (as of last night) and new gaskets and new glow plug (OS #8) - no fuel through it yet. There is a chip in the front muffler mount screw hole. It DOES NOT effect the seal of the muffler at all and it DOES NOT effect the performance. -Align high performance pipe -Fut S9542's on cyclic controls -Fut 3151 on throttle -Fut 520 gyro -Fut BLS 251 on tail -CYG ATG governor with back plate sensor -Align 2 in 1 regulator -Fut 6008HS receiver -2 Relion 2600mAh lithium-ion batteries -2 canopies - original "beater" and clean aftermarket canopy bought at a fun fly (it's been on heli twice) Cost $1580.00 new,asking $800.00 PP and shipped, which seems to be on par with other 600N's for sale with lesser electronics, mine are better. Last edited by Scott1115; 03-30-2012 at 12:58 PM..

03-22-2012, 07:45 AM	#2 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	TTT

03-25-2012, 04:23 PM	#5 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	Video taken 03/24/12 Sorry image quality isn't great - it was very windy and overcast. But you can see it runs and flies great!

04-07-2012, 09:49 PM	#9 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	Easter/Passover sale Easter Sunday, may 8th only - $100.00 off!!!!! $700.00 PP'd and shipped

04-08-2012, 10:44 AM	#10 (permalink)
MrHeliNewbie Registered Users Join Date: Oct 2011	ok that price has me wanting to ask.... I this the belt drive 600N V1 Align..... ( same head and tail setup as the Align 600E V1 ) __________________ Tarot 500/550 9s / Tarot 450ProV2 4s / 600E V1 8s Academy Of Model Aeronautics 98418 If Align put their name on a pile of dog crap stuck 2 blades in it and packaged it in a super combo, people would get in line to pre order. I just dont get it

03-23-2012, 06:01 PM	#3 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	Put 6 lights on the helicopter today. Engine runs great and it flies so well.

03-24-2012, 07:32 PM	#4 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	Come on guys, this heli ROCKS!!! I need to sell to fund a Compass 7HV. Make a fair offer and it is yours.

03-27-2012, 08:07 PM	#6 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	BUY ME

03-31-2012, 10:22 PM	#7 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	^up top^

04-05-2012, 10:32 AM	#8 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	bump

04-08-2012, 01:01 PM	#11 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	No, its not the same. This has a torque tube, always did. Came from box as a TT. It was the V1 600Nitro pro with upgraded parts to make it an "LE", less the metal grips. I have it priced to sell because i want to fund a Compass 7HV or a Synergy E7. Last edited by Scott1115; 04-08-2012 at 04:14 PM..

04-10-2012, 08:58 PM	#12 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	TTT

04-14-2012, 11:57 AM	#13 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	weekend bump

04-16-2012, 12:24 PM	#14 (permalink)
Scott1115 Registered Users Thread Starter Join Date: Apr 2010	Price redused Now asking $700.00, if not sold I will part out soon. Need to fund another project.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in