Register Now

K27R · 03-27-2008, 02:29 PM

I am thinking of using Hitec 6975 or 5985MG or 5965MG with 2S A123 2300maH pack directly for cyclic and throttle and Castle BEC for gyro.
Anyone have any experience with these?
What else is a good servo besides the 8717 to be used at 6V?

2kwik2c · 03-27-2008, 03:09 PM

I'm currently using Futaba's BLS451 MG servos for the cyclic and Futaba 9254 for the throttle on my Hirobo Freya EVO 90. On my Trex 600e I'm using JR 8717 for the cyclic. I used to use Hitec 5625 as my cyclic before I changed to JR. So far these servos have been good to me.

wrex · 03-27-2008, 03:40 PM

im also using the BLS451 on 6v they work great...

K27R · 03-28-2008, 10:41 AM

I have heard problems with the brushless servos not centering.
Anyone use the Hitec servos in Heli?

Skiddz · 03-28-2008, 11:19 AM

Not on a 90, but I use Hitec 6975 and 6965 on my two Trex 600s.

03-27-2008, 02:29 PM	#1 (permalink)
K27R Registered Users Join Date: Sep 2004	What servo for 6V on 50 and 90? edit: anyone using Hitec servos? I am thinking of using Hitec 6975 or 5985MG or 5965MG with 2S A123 2300maH pack directly for cyclic and throttle and Castle BEC for gyro. Anyone have any experience with these? What else is a good servo besides the 8717 to be used at 6V? Last edited by K27R; 03-28-2008 at 10:39 AM..

03-28-2008, 11:19 AM	#5 (permalink)
Skiddz HF Support My HF Map location Join Date: May 2006	Not on a 90, but I use Hitec 6975 and 6965 on my two Trex 600s. __________________ -Kevin No helicopters were harmed in the creation of this post. AMA CD # 7309, Turbine Waiver# RW 890 Click Here For Bergen Intrepid Turbine Build Videos

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-27-2008, 03:09 PM	#2 (permalink)
2kwik2c Registered Users Join Date: May 2007	I'm currently using Futaba's BLS451 MG servos for the cyclic and Futaba 9254 for the throttle on my Hirobo Freya EVO 90. On my Trex 600e I'm using JR 8717 for the cyclic. I used to use Hitec 5625 as my cyclic before I changed to JR. So far these servos have been good to me.

03-27-2008, 03:40 PM	#3 (permalink)
wrex Registered Users Join Date: Jan 2008	im also using the BLS451 on 6v they work great...

03-28-2008, 10:41 AM	#4 (permalink)
K27R Registered Users Thread Starter Join Date: Sep 2004	I have heard problems with the brushless servos not centering. Anyone use the Hitec servos in Heli?

Register Now

Log-in