Register Now

supercaptaincrash · 08-03-2010, 09:33 AM

im after the correct servo rod for my rear mounted tail servo on my 90 se! i recently bought a raptor 90 rear servo rod but it is to short? are the se carbon booms longer than standard?
also after the correct number for elevator lever for the se!

MKG... · 08-03-2010, 08:30 PM

Elevator Lever P/N: PV0133
Rear Servo Rod P/N: PV0453

These are Thunder Tiger part numbers out of the Raptor 90 SE manual. I can't speak to the length of the aluminum tail boom versus the carbon tail boom. I have not used the aluminum one.

supercaptaincrash · 08-04-2010, 02:32 AM

Thanks for the reply mate

Thats the number i used for the rear servo rod! but its short! which is why i need to know if the carbon boom is longer slightly!

seanh · 08-22-2010, 07:13 PM

quick UK has a CF rod conversion...

do a little searching on their site...you can get just the ends...cut the rod to what you need

http://www.quickuk.eu/cat/thunder_ti...rts.html?nav=5

08-03-2010, 09:33 AM	#1 (permalink)
supercaptaincrash Registered Users Join Date: Aug 2009	correct part number for 90 se parts please! im after the correct servo rod for my rear mounted tail servo on my 90 se! i recently bought a raptor 90 rear servo rod but it is to short? are the se carbon booms longer than standard? also after the correct number for elevator lever for the se!

08-03-2010, 08:30 PM	#2 (permalink)
MKG... Registered Users My HF Map location Join Date: Feb 2010	Part Numbers Elevator Lever P/N: PV0133 Rear Servo Rod P/N: PV0453 These are Thunder Tiger part numbers out of the Raptor 90 SE manual. I can't speak to the length of the aluminum tail boom versus the carbon tail boom. I have not used the aluminum one.

08-22-2010, 07:13 PM	#4 (permalink)
seanh Registered Users Join Date: Feb 2007	quick UK has a CF rod conversion... do a little searching on their site...you can get just the ends...cut the rod to what you need http://www.quickuk.eu/cat/thunder_ti...rts.html?nav=5 __________________ X-cell Fury 90: 601/9251, 8231's Cyc; DS650; OS 91MP-6; Jr Vibe 90; OS 91RJX Pipe; Jr 8231 cyclic, 770 3D/G8900, Prfct Reg. CCPM; T-Rex 600 NP: 6965HB, 425MG Throttle GY 520/9254; OS50 Hyper,MP-5, Prfct Reg; 600E Bstx, nue1910

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-04-2010, 02:32 AM	#3 (permalink)
supercaptaincrash Registered Users Thread Starter Join Date: Aug 2009	Thanks for the reply mate Thats the number i used for the rear servo rod! but its short! which is why i need to know if the carbon boom is longer slightly!

Register Now

Log-in