Register Now

Spork01 · 01-15-2012, 03:16 PM

I decided to give the beam e4 v2 a go. I have the align 450mx motor with the 15T pinion. What mod is the main gear? I was looking at the spare parts listed at amainhobbies and saw they have 15T pinion available.

Is the main gear spacing the same as align?

Spork01 · 01-15-2012, 03:30 PM

I'm going to use hitec hs65hb's on cyclic and futaba 9257 for the tail. Do I need to buy any special adapters to mount the tail servo within the frame?

Inverse · 01-17-2012, 12:37 PM

On the Advance, no.
9254 will slot straight in.

slowflow · 01-20-2012, 01:59 PM

Same pinion as align 450.

Fabien · 01-31-2012, 06:21 PM

Hi,

be carefull with mixing up other brand's motor pinons, the teeth cut might not be the same as the Beam ones, not because of different modules used, but depending on the number of teeth of the main gear, then there is a tooth profile to modify depending on the motor pinion (Addendum / dedundum). If with a Align pinion you experience excessive wear of the main gear, you will then need a Beam one

Best regards,

Fabien

01-15-2012, 03:16 PM	#1 (permalink)
Spork01 Fear the Spork!! Join Date: Mar 2008	main gear mod I decided to give the beam e4 v2 a go. I have the align 450mx motor with the 15T pinion. What mod is the main gear? I was looking at the spare parts listed at amainhobbies and saw they have 15T pinion available. Is the main gear spacing the same as align? __________________ Trex 450L, OMP M2, Futaba 14SG

01-15-2012, 03:30 PM	#2 (permalink)
Spork01 Fear the Spork!! Thread Starter Join Date: Mar 2008	I'm going to use hitec hs65hb's on cyclic and futaba 9257 for the tail. Do I need to buy any special adapters to mount the tail servo within the frame? __________________ Trex 450L, OMP M2, Futaba 14SG

01-17-2012, 12:37 PM	#3 (permalink)
Inverse Registered Users My HF Map location Join Date: Jan 2010	On the Advance, no. 9254 will slot straight in. __________________ Compass 3D+ - OS55 Hyper/Hatori/Vbar Atom 500 Tarot 450 Pro - AR7200BX Spektrum DX8

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-20-2012, 01:59 PM	#4 (permalink)
slowflow Registered Users My HF Map location Join Date: Sep 2010	Same pinion as align 450.

01-31-2012, 06:21 PM	#5 (permalink)
Fabien Registered Users Join Date: Feb 2006	Hi, be carefull with mixing up other brand's motor pinons, the teeth cut might not be the same as the Beam ones, not because of different modules used, but depending on the number of teeth of the main gear, then there is a tooth profile to modify depending on the motor pinion (Addendum / dedundum). If with a Align pinion you experience excessive wear of the main gear, you will then need a Beam one Best regards, Fabien

Register Now

Log-in