Register Now

dodge250 · 03-27-2009, 03:23 PM

In desprite need of a couple tail rotor blades, every place I check they are out of stock

WickedDragon · 03-27-2009, 03:32 PM

Will work in a pinch......

http://www3.towerhobbies.com/cgi-bin...?&I=LXHHE2&P=7

Whoami · 03-28-2009, 09:21 AM

Horizon Hobby suggested the same as above

GWSEP3020
I bought two and put one on my CPP2 and it works ok.
Be aware that the adapter for the stock model must come off and good luck on pressing the GWS onto the shaft, I used channellocks and it worked but I doubt it will come off without breaking.

Not sure why E-flite is taking so long on stocking their own parts for a new model...
They aren't 'out of stock', they haven't even started stocking them yet!

dieselracer · 03-28-2009, 10:09 AM

I like the EP-3030 better. and i dont use the adaper, i press them directly on to the motor shaft.

dodge250 · 03-28-2009, 08:34 PM

Thanks just placed an order 6 for $4.13 good deal

03-27-2009, 03:23 PM	#1 (permalink)
dodge250 Join Date: Feb 2009	Cp pro 2 In desprite need of a couple tail rotor blades, every place I check they are out of stock

03-27-2009, 03:32 PM	#2 (permalink)
WickedDragon Registered Users My HF Map location Join Date: Jul 2007	Will work in a pinch...... http://www3.towerhobbies.com/cgi-bin...?&I=LXHHE2&P=7 __________________ Doug Bonham, WickedDragonRC *Gravity isn't just a good idea, it's the LAW!* TRex450SE DFC; TRex450Pro DFC; TRex500 DFC Pro; TRex600N DFC's; CHP-TRex600eDL DFC; Trex700e DFC Pro

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-28-2009, 09:21 AM	#3 (permalink)
Whoami Registered Users Join Date: Mar 2009	Horizon Hobby suggested the same as above GWSEP3020 I bought two and put one on my CPP2 and it works ok. Be aware that the adapter for the stock model must come off and good luck on pressing the GWS onto the shaft, I used channellocks and it worked but I doubt it will come off without breaking. Not sure why E-flite is taking so long on stocking their own parts for a new model... They aren't 'out of stock', they haven't even started stocking them yet!

03-28-2009, 10:09 AM	#4 (permalink)
dieselracer Registered Users My HF Map location Join Date: Aug 2007	I like the EP-3030 better. and i dont use the adaper, i press them directly on to the motor shaft.

03-28-2009, 08:34 PM	#5 (permalink)
dodge250 Thread Starter Join Date: Feb 2009	Thanks just placed an order 6 for $4.13 good deal

Register Now

Log-in