Register Now

mrloseth · 04-07-2014, 04:02 PM

Hello.
I have seen many threads about this but no answer.
I have the tm1000
And voltage/temp
Sensor on my setup, but i want to know the mah reading under flight, but i have a master mezon 130 esc and jlog2,6 does not support the mezon, can i do something else?
:-o

TeroS · 04-07-2014, 04:23 PM

Yes, this: http://www.rctronix.de/wp/?p=163 plugs straigth to X-Bus of TM1000.

If my memory don't fail me it was 48 euros posted (in europe).

My DX9 doesn't do voice alerts on powerbox capacity, filed a bug to HH about it. (Haven't heard from them tho...) Vibe and tone works.

mrloseth · 04-07-2014, 04:44 PM

But hbave you compared the mah reading on this system, and what u put back on your charger?

psylence519 · 04-07-2014, 11:15 PM

If it's just pushing what comes out of the Mezon, it should be pretty darn accurate. I think the last time I did a comparison on my Mezon it was within 2-4% of what I put back into the batteries.

mrloseth · 04-08-2014, 03:55 PM

Oki. Have u tried this rctronix?

ragge1 · 04-08-2014, 04:16 PM

I tested this on my helis and still have one on my 6HV with the DX8 , just got a DX9 not yet tested with the DX9

Click image for larger version

Name: 2014-01-13 20.16.20.jpg
Views: 154
Size: 100.4 KB
ID: 501153

current sensor (0 min 43 sec)

mrloseth · 04-08-2014, 04:29 PM

Heisan ragge, har du bare loddet denne enheten imellom pluss og minus og så ledning frA boksen til tm 1000?

ragge1 · 04-08-2014, 04:49 PM

Quote:

Originally Posted by mrloseth

Heisan ragge, har du bare loddet denne enheten imellom pluss og minus og så ledning frA boksen til tm 1000?

local board

http://www.modellflynytt.no/showthre...current+sensor

ragge1 · 04-08-2014, 04:57 PM

Quote:

Originally Posted by mrloseth

Heisan ragge, har du bare loddet denne enheten imellom pluss og minus og så ledning frA boksen til tm 1000?

connect to the negative side of the power cable , and the x-bus cable between TM 1000 and the current unit

( svaret på englesk så andra kan å læser den )

TeroS · 05-16-2014, 12:41 PM

Difference between what it shows and what goes in is just a few mAh, used mostly with a 2x 7S 5000mAh flight packs.

jean-michael · 06-14-2014, 12:56 AM

Hi, I would to have this mah sancor but I don't understand this language and I don't know where is easy to buy. Can I buy thus on eBay ?

04-07-2014, 04:02 PM	#1 (permalink)
mrloseth Registered Users Join Date: Feb 2008	Dx9 mah reading Hello. I have seen many threads about this but no answer. I have the tm1000 And voltage/temp Sensor on my setup, but i want to know the mah reading under flight, but i have a master mezon 130 esc and jlog2,6 does not support the mezon, can i do something else? :-o __________________ Mcpx-hpo5s 9t wow pnp kit-xtreme alu parts-kbdd blades t-rex 450 v2 scorpion hk2221-6v2 11t and hk2221-8v2 13t t-rex 500 cf scorpion 1900kv 12t 6s fp 2500mah 25c Bade 130 x spin 8000kv 2s 65c

04-07-2014, 04:23 PM	#2 (permalink)
TeroS Registered Users Join Date: Mar 2013	Yes, this: http://www.rctronix.de/wp/?p=163 plugs straigth to X-Bus of TM1000. If my memory don't fail me it was 48 euros posted (in europe). My DX9 doesn't do voice alerts on powerbox capacity, filed a bug to HH about it. (Haven't heard from them tho...) Vibe and tone works. __________________ RC-Thoughts.com - TeroS formerly known as CP-Geek

04-07-2014, 04:44 PM	#3 (permalink)
mrloseth Registered Users Thread Starter Join Date: Feb 2008	Dx9 mah reading But hbave you compared the mah reading on this system, and what u put back on your charger? __________________ Mcpx-hpo5s 9t wow pnp kit-xtreme alu parts-kbdd blades t-rex 450 v2 scorpion hk2221-6v2 11t and hk2221-8v2 13t t-rex 500 cf scorpion 1900kv 12t 6s fp 2500mah 25c Bade 130 x spin 8000kv 2s 65c

04-07-2014, 11:15 PM	#4 (permalink)
psylence519 Registered Users Join Date: Jan 2012	If it's just pushing what comes out of the Mezon, it should be pretty darn accurate. I think the last time I did a comparison on my Mezon it was within 2-4% of what I put back into the batteries. __________________ X5 / Goblin 500 / Goblin 700

04-08-2014, 03:55 PM	#5 (permalink)
mrloseth Registered Users Thread Starter Join Date: Feb 2008	Dx9 mah reading Oki. Have u tried this rctronix? __________________ Mcpx-hpo5s 9t wow pnp kit-xtreme alu parts-kbdd blades t-rex 450 v2 scorpion hk2221-6v2 11t and hk2221-8v2 13t t-rex 500 cf scorpion 1900kv 12t 6s fp 2500mah 25c Bade 130 x spin 8000kv 2s 65c

04-08-2014, 04:29 PM	#7 (permalink)
mrloseth Registered Users Thread Starter Join Date: Feb 2008	Dx9 mah reading Heisan ragge, har du bare loddet denne enheten imellom pluss og minus og så ledning frA boksen til tm 1000? __________________ Mcpx-hpo5s 9t wow pnp kit-xtreme alu parts-kbdd blades t-rex 450 v2 scorpion hk2221-6v2 11t and hk2221-8v2 13t t-rex 500 cf scorpion 1900kv 12t 6s fp 2500mah 25c Bade 130 x spin 8000kv 2s 65c

05-16-2014, 12:41 PM	#10 (permalink)
TeroS Registered Users Join Date: Mar 2013	Difference between what it shows and what goes in is just a few mAh, used mostly with a 2x 7S 5000mAh flight packs. __________________ RC-Thoughts.com - TeroS formerly known as CP-Geek

06-14-2014, 12:56 AM	#11 (permalink)
jean-michael Registered Users Join Date: Sep 2012	Hi, I would to have this mah sancor but I don't understand this language and I don't know where is easy to buy. Can I buy thus on eBay ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in