Register Now

B0tt0mline · 10-22-2014, 05:03 AM

Hi guys,

I updated all my Skookum stuff (SK720, SK540, GPS and field terminal).

Everything woked perfectly (field terminal as well), but from suddenly the field terminal shows "Offline" and "No Device".

Is this a known bug?

Unfortunatelly I do not have my win PC with me to update the try the field terminal via USB...

Thanks,

Alex

B0tt0mline · 10-22-2014, 10:02 AM

Now i tried to update the field terminal again, does not work as well...

Is there anything I could do to fix this? or is the field terminal broken?

SpeedTape · 10-22-2014, 10:20 AM

I am assuming, based on what you've written, that your field terminal powers up when you connect it to a gyro (and the gyro is powered up). Your LCD's screen shows that no device (gyro) is connected.

This suggests that the power and ground wires in the black LCD cable are OK while there may be a bad connection in one or both of the two data lines.

I would closely examine the cable for damage. They break eventually if you repeatedly unplug them by pulling on the wire.

10-22-2014, 05:03 AM	#1 (permalink)
B0tt0mline Registered Users Join Date: Aug 2013	4.05 Field Terminal - No Connection Hi guys, I updated all my Skookum stuff (SK720, SK540, GPS and field terminal). Everything woked perfectly (field terminal as well), but from suddenly the field terminal shows "Offline" and "No Device". Is this a known bug? Unfortunatelly I do not have my win PC with me to update the try the field terminal via USB... Thanks, Alex Last edited by B0tt0mline; 10-22-2014 at 06:15 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-2014, 10:02 AM	#2 (permalink)
B0tt0mline Registered Users Thread Starter Join Date: Aug 2013	Now i tried to update the field terminal again, does not work as well... Is there anything I could do to fix this? or is the field terminal broken?

10-22-2014, 10:20 AM	#3 (permalink)
SpeedTape Registered Users Join Date: Feb 2012	I am assuming, based on what you've written, that your field terminal powers up when you connect it to a gyro (and the gyro is powered up). Your LCD's screen shows that no device (gyro) is connected. This suggests that the power and ground wires in the black LCD cable are OK while there may be a bad connection in one or both of the two data lines. I would closely examine the cable for damage. They break eventually if you repeatedly unplug them by pulling on the wire.

Register Now

Log-in