Register Now

Moreflying · 12-24-2010, 12:46 AM

Not too many folks use the 94761z on the tail anymore. I've been using them for several years on my 450'S and believe it or not on my 500. They run at 6v and spec out pretty well (torque and speed wise). In my experience, they are strong, all metal, and reliable. So..I'd like to stick with it and pair it up with a Quark. I just don't know if it will work. What can anyone tell me about this? Will it work and if so what are the specs to set the gyro at? Thanks.

TMoore · 12-24-2010, 01:04 PM

1.5ms centering 333hz is fine with the Quark;

Moreflying · 12-28-2010, 02:06 AM

Thank you for the info. It's a great little servo. I'll try it with the gyro.

prototype3a · 02-06-2011, 08:05 PM

Probably because it is a terrible tail servo.

http://www.spartan-rc.com/resources/servodb/servo.php

Didn't even get a full star.

TMoore · 02-06-2011, 08:27 PM

The 761 was designed as a wing servo, not a tail servo.

TM

12-24-2010, 12:46 AM	#1 (permalink)
Moreflying Registered Users Join Date: Oct 2007	Quark Gyro and 94761Z Compatible Not too many folks use the 94761z on the tail anymore. I've been using them for several years on my 450'S and believe it or not on my 500. They run at 6v and spec out pretty well (torque and speed wise). In my experience, they are strong, all metal, and reliable. So..I'd like to stick with it and pair it up with a Quark. I just don't know if it will work. What can anyone tell me about this? Will it work and if so what are the specs to set the gyro at? Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-24-2010, 01:04 PM	#2 (permalink)
TMoore Registered Users Join Date: Apr 2004	1.5ms centering 333hz is fine with the Quark;

12-28-2010, 02:06 AM	#3 (permalink)
Moreflying Registered Users Thread Starter Join Date: Oct 2007	Thank you for the info. It's a great little servo. I'll try it with the gyro.

02-06-2011, 08:05 PM	#4 (permalink)
prototype3a Registered Users My HF Map location Join Date: Jun 2006 Location: Chrisitansburg VA USA	Probably because it is a terrible tail servo. http://www.spartan-rc.com/resources/servodb/servo.php Didn't even get a full star.

02-06-2011, 08:27 PM	#5 (permalink)
TMoore Registered Users Join Date: Apr 2004	The 761 was designed as a wing servo, not a tail servo. TM

Register Now

Log-in