115 mm tail blades

[Jotto]

Is anyone using 115 mm tail blades on the Logo 700? I'm using Edge 115 on my Compass 7HV. It would have been convenient to use the same tail blades, as I'd like to have several spare sets of them at home.

I'm flying at 1850-2000 RPM headspeed.

[NTM]

I don't think you want to go more than 105mm given the rather fast tail ratio and long spindle length of the tail.'
105's is enough to deal with 753mm blades and 14s...

[Mentalic]

Yea I'm using 116mm tail blades and prefer them by far. I tend to run lots of pitch and lower head speeds to make machines move. So if your running over 2k head speed there's no need for larger than 105's.

[TommyBear]

The current Logo 700 Combo is supplied with 115mm EDGE rather than the original 105. I replaced my 105 with 115 and got rid of the slow drift in hover.

[futurase]

I can come across in a FAST forward hurricane roll sideways and piro slow or fast into the plane of direction which is into the wind. ZERO hesitation.

105 Edge

This is 2050. The Logo has NO need of bigger tail blades on 700. You just need to tweak the tail. It holds GOOOOOOD on Logo.

[richardmills]

My new kit just came with 105's.

Is that what it's shipping with now?

[sgrim80]

Originally Posted by richardmills

My new kit just came with 105's.

Is that what it's shipping with now?

L700 always shipped with 105s.

[futurase]

Always has...

[TommyBear]

This is the latest screen shot from Australia's sole authorised Mikado distributor.

[ola.c]

From Mikados shop:
Specifications Helicopter
Rotor diameter
1,61m
Rotor blades
713mm EDGE
RTF weight
ca. 5,5kg
recommended batterie
2 * 6S LiPo 5000
Main gear ratio
9,21 - 10,29 (Pinion 17-19 teeth)
Tail gear ratio
1:5
Main Gear size
175 teeth Modul 1
Length
1420mm
Hight
440mm
Width
210mm
Kit Content
Kit
Kit with pre-assembled components
Manual
detailed printed manual
Motors
---
Motor pinion
no pinion included
ESC
---
Servos
---
VBar electronic
---
Blades
713mm EDGE
Tail Blades
105mm EDGE
Canopy
Airbrushed Canopy

[sgrim80]

Initially alot of vendors said they came with 115s because they copied and pasted the specs from the Logo 800. I received the 2nd L700 kit to be sold in a retail environment and it had 105s.

[Tenguru]

Originally Posted by sgrim80

Initially alot of vendors said they came with 115s because they copied and pasted the specs from the Logo 800. I received the 2nd L700 kit to be sold in a retail environment and it had 105s.

I received 105mm tail blades in my kit.