DS515M Servo Question

[semperfib400]

Does anybody know the size of the bearing in the DS515M servo?

My elevator servo has developed quite a lot of slop in it and I'm looking to replace that bearing. At this point I'm assuming the slop is in the bearning and don't want to replace the entire gear set since that's still good yet.

I haven't crashed it or anything and the pitch and aileron servos are both free of any play.

Do these servos typically not last very long? I've got probably only 100 flights on it.

Thanks in advance for the help!

[acidla]

Hi,

Don't have Align servos but,
if you have a caliper, you can take the bearing off the servo and measure it.

Also by taking it apart you will be 100% sure what is causing the slop.