Register Now

mwillack · 02-06-2009, 01:47 AM

I've connected my Accucell-8150 to my laptop with the supplied USB cable. It said it found the hardware and was installing the software. Then the final message was the software was installed and ready to use. Now all I need to know is where to find it. No icons, nothing in the start menu...nothing. I'd sure like to know where to find it...

hanskez · 02-06-2009, 05:38 AM

Hi

at me to your msn then i will send it to you

greets

Hanskez

msn justmehi88@hotmail.com

askiba · 07-15-2009, 06:35 AM

I'm looking for the software, too. I found some german program "LogView" but it does not enlist Turnigy device.

Thank you.

life2short1971 · 07-15-2009, 07:16 AM

Quote:

Originally Posted by askiba

I'm looking for the software, too. I found some german program "LogView" but it does not enlist Turnigy device.

Thank you.

Use bantam bc8 or bc6 for model. It will work that way

askiba · 07-15-2009, 08:02 AM

Thank you!

Rogue22 · 08-15-2009, 08:20 AM

Obviously, no software came with my Accucell-8 either. If I had it, what would it do for me? I like the charger (both of them) quite well, so I am not complaining. I assume the software lets you keep track of each battery in a spreadsheet of something?

Thank you. Steve

docrhino · 10-04-2009, 09:26 PM

I downloaded this from HC website It works fine on Windows XP. The Logview software didn't work on my computer. Remember to load the USB driver 1st.
Doc

bionicbone · 04-18-2011, 04:17 AM

I just ordered 2 of these chargers, Accucell-8150. Neither have a USB lead in the box. What does the lead look like or where can I get one? If I knew the connections I guess I could make one easily as long as its standard stuff. Can anyone offer any help with the info I need?

Cheers
Kev

bionicbone · 05-03-2011, 06:31 AM

On further investigation it seems that the chargers I have only do temperature. I wonder if it can be modified like the 6 cell version

02-06-2009, 01:47 AM	#1 (permalink)
mwillack Registered Users My HF Map location Join Date: Mar 2008	Turnigy Accucell-8150 Software...where is it? I've connected my Accucell-8150 to my laptop with the supplied USB cable. It said it found the hardware and was installing the software. Then the final message was the software was installed and ready to use. Now all I need to know is where to find it. No icons, nothing in the start menu...nothing. I'd sure like to know where to find it... __________________ Mark, AMA #922614 Blade mCX Trex 450SE, Spektrum DX7 Trex 500 ESP "I can do Awesome 3D, just not intentionally..."

08-15-2009, 08:20 AM	#6 (permalink)
Rogue22 Registered Users Join Date: Jan 2009 Location: South Florida	Obviously, no software came with my Accucell-8 either. If I had it, what would it do for me? I like the charger (both of them) quite well, so I am not complaining. I assume the software lets you keep track of each battery in a spreadsheet of something? Thank you. Steve __________________ SAB Goblin 700 Sport, 700 Krakens, 420, 580, 700 Raw, Whiplash-G2 and Goosky S2; JETI DS-24 and VControl EVO

04-18-2011, 04:17 AM	#8 (permalink)
bionicbone Registered Users My HF Map location Join Date: Jan 2009	I just ordered 2 of these chargers, Accucell-8150. Neither have a USB lead in the box. What does the lead look like or where can I get one? If I knew the connections I guess I could make one easily as long as its standard stuff. Can anyone offer any help with the info I need? Cheers Kev __________________ CPX450, HobbyWing 35A ESC, Scorpion 2221-8, HS65MG's, HK401B, InoLabs D401HB Trex450 Sport Combo - All Stock Trex600ESP Combo, converted to belt drive. HK600 Stock Build Project

05-03-2011, 06:31 AM	#9 (permalink)
bionicbone Registered Users My HF Map location Join Date: Jan 2009	On further investigation it seems that the chargers I have only do temperature. I wonder if it can be modified like the 6 cell version __________________ CPX450, HobbyWing 35A ESC, Scorpion 2221-8, HS65MG's, HK401B, InoLabs D401HB Trex450 Sport Combo - All Stock Trex600ESP Combo, converted to belt drive. HK600 Stock Build Project

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-06-2009, 05:38 AM	#2 (permalink)
hanskez Join Date: Jan 2009	Hi at me to your msn then i will send it to you greets Hanskez msn justmehi88@hotmail.com

07-15-2009, 06:35 AM	#3 (permalink)
askiba Registered Users Join Date: May 2009	I'm looking for the software, too. I found some german program "LogView" but it does not enlist Turnigy device. Thank you.

07-15-2009, 08:02 AM	#5 (permalink)
askiba Registered Users Join Date: May 2009	Thank you!

Register Now

Log-in