DX8 settings for Parkzone Sukhoi SU29-MM BNF

[Fingerless]

Just got the new Model, i have a DX8 with the settings in the book the elevator only goes up, the panic button is not working i think, , i cant be sure if any of the modes are working, as all the throws are the same, apart from the elevator which only goes up.

I could see the different modes work on my Blade 200 working and when you press the panic button you can see the affect, i must be doing something wrong i just dont know what, perhaps you have a guide for setting it up on a DX8, i cant seem to get it to work, do you have any advice, thank you.

I got it to work just a problem in precision mode now.

[Fingerless]

[ame]http://youtu.be/aYmnKFaAzHU[/ame]

[Fooferdoggie]

Ya you need to reverse the panic button I had the same thing.

[Fingerless]

How do you reverse the panic button and what does it do if you can.

[Fooferdoggie]

In the manual it tells you to reverse the trainer button if you don't it is on unless you push the button. Try pushing it and see if it is right it only limits travel when pushed took me a bit t discover that.

[Fingerless]

Thanks for that i did reverse it, that would be the aux1, the problem is there is small amount of movement from the AS3X system when you hold the plane and tilt it, in stagility mode its ok in 3d mode the ailerons dont move much and in precision mode only the rudder works.