START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Eagle Tree Systems Onboard data loggers, telemetry, and OSD support |
|
LinkBack | Thread Tools | Display Modes |
04-29-2009, 11:04 PM | #1 (permalink) |
Join Date: May 2006
|
e-Logger Temp Sensor Mounting
I just got my e-Logger with an RPM and Temp Loop. I am mounting the sensors to my Vibe 50. Do I just wrap the temp loop around the OS 50 head, thru the fins and sinch it up?
|
Sponsored Links | |||
Advertisement |
|
04-30-2009, 03:50 PM | #2 (permalink) |
Registered Users
Join Date: Jan 2008
|
Based on my very limited experience and hope that someone will reply to my thread, I can tell you that all you need to do is wrap around the motor, assuming you have an inrunner motor. Make sure it's secure enough and the remaining of the cable is not loose. Also, I'm assuming you have already set it up and "synched" to the laptop, since I believe you have to FIRST tell the elogger via the usb cable, what sensors you will be mounting.
Hope this helps!
__________________
JR X9303 TREX 500, TREX450, Joker 3 (almost ready),Typhoon3D, EZ* FPV, Stryker (Acromaster and EZG still in box) |
04-30-2009, 03:53 PM | #3 (permalink) |
Thread Starter
Join Date: May 2006
|
Yup, you are right. I have done all the setup (was easy) and everything already. I am running a nitro heli, not an electric heli. I was asking if I can just loop it around the head, thru the cooling fins or if there is a better spot to place it.
|
Thread Tools | |
Display Modes | |
|
|