Register Now

dakid954 · 01-03-2007, 09:41 PM

hi all i have a used 9c radio and for some reason my evelatoy stick is throttle and the throttle stick is useless it was fine before i reset all the models can someone tell my what i changed that i need to change back please

DavidH · 01-04-2007, 08:28 AM

Page 15 of the 9C manual

Changing Modes:
Hold down the Mode and End buttons while turning on the Transmitter. The screen reads "STK-MODE". Change this to
the correct mode. Note that this will NOT change the throttle and elevator ratchets, etc. Those are mechanical changes that
must be done by a service center.

You want the transmitter to be on Mode 2.

David

dakid954 · 01-04-2007, 08:33 AM

thanks david i did that and switched it to mode 2 and that fixed the problem thanks

01-03-2007, 09:41 PM	#1 (permalink)
dakid954 Join Date: Dec 2006	(please help)need help with my 9c(please help) hi all i have a used 9c radio and for some reason my evelatoy stick is throttle and the throttle stick is useless it was fine before i reset all the models can someone tell my what i changed that i need to change back please

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-04-2007, 08:28 AM	#2 (permalink)
DavidH My HF Map location Join Date: Mar 2004	Page 15 of the 9C manual Changing Modes: Hold down the Mode and End buttons while turning on the Transmitter. The screen reads "STK-MODE". Change this to the correct mode. Note that this will NOT change the throttle and elevator ratchets, etc. Those are mechanical changes that must be done by a service center. You want the transmitter to be on Mode 2. David

01-04-2007, 08:33 AM	#3 (permalink)
dakid954 Thread Starter Join Date: Dec 2006	thanks david i did that and switched it to mode 2 and that fixed the problem thanks

Register Now

Log-in