Register Now

Rotor-Krazy · 05-27-2006, 08:28 AM

Hello All. This is my first time here, And Im fairly new to flying Helis. Can anyone offer a suggestion for pitch curve settings on the Heli Max MX400? Thanx.

Matthew · 05-27-2006, 12:27 PM

I have an MX400 I just run -9 +9 in all modes. Hope this helps.

Rotor-Krazy · 05-27-2006, 01:50 PM

ok thanx. i will try that.

dickal14712 · 05-28-2006, 06:21 PM

If you are new to heli's you might want to set your negative at -3 or -4 to start out so if you panic you dont slam it in the groung with -9 . Just a thought.
Dick

Rotor-Krazy · 05-29-2006, 07:37 AM

ok, thanx

RayB · 06-16-2006, 12:31 AM

Are you looking for pitch curves on your radio or static setup of pitch for your blades?

Ray

05-27-2006, 08:28 AM	#1 (permalink)
Rotor-Krazy Join Date: May 2006	Pitch Curves for the Heli Max MX400 Hello All. This is my first time here, And Im fairly new to flying Helis. Can anyone offer a suggestion for pitch curve settings on the Heli Max MX400? Thanx.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-27-2006, 12:27 PM	#2 (permalink)
Matthew My HF Map location Join Date: Apr 2004	I have an MX400 I just run -9 +9 in all modes. Hope this helps.

05-27-2006, 01:50 PM	#3 (permalink)
Rotor-Krazy Thread Starter Join Date: May 2006	ok thanx. i will try that.

05-28-2006, 06:21 PM	#4 (permalink)
dickal14712 Registered Users Join Date: May 2006	If you are new to heli's you might want to set your negative at -3 or -4 to start out so if you panic you dont slam it in the groung with -9 . Just a thought. Dick

05-29-2006, 07:37 AM	#5 (permalink)
Rotor-Krazy Thread Starter Join Date: May 2006	ok, thanx

06-16-2006, 12:31 AM	#6 (permalink)
RayB Join Date: May 2006	Are you looking for pitch curves on your radio or static setup of pitch for your blades? Ray

Register Now

Log-in