Pinion question for fusion .08 mod?

[AnTi Taco]

i see that the fusion main gear is a mod.08 so does it matter if you use a mod .07 pinion prob a dumb question but this is the first time i ever realized about different mods and pinion sizes

[silverbullet]

better not do this
there wil be a good choice of pinions avaible 5mm and 6mm (Module 0.8) from Outrage

[needmorparts]

I can tell you from experience that it will tear the main gear up very quickly! Only made that mistake once.

[AnTi Taco]

i thought i read the kit will only come with 5mm size pinions i need 6mm..maybe i read wrong

[silverbullet]

jes the Heli will come with 5mm Pinions Modul 0.8 ( i belive 14T-15T-16T includet)
however as a OPTION! 6mm Pinions will be avaible and the 6mm Shaftsuport also, BUT not with the Kit!

same here, i just holding my brand new X-era Motor 4025-3Y 560 with 6mm shaft in my Hands and want to put it in my comming Fusion 50 which i wayting for

[AnTi Taco]

ohh ok i hope they have those pinions available the same time as the release/

[fusionbrad]

why did they make it 5mm? aren't most motors 6mm? i just hope hd get pinions in before the kits, i dont want to sit with a heli i cant fly because of a pinion. and i cant find mod .8 anywhere

[BonewJunior]

To Make More $$$$$$$$$$$$

KIT + Pinion + Pinion support = $$$$$$$$$$$$$$$$

so how much is going to cost the pinion + pinion support for 4025 motors?

[fusionbrad]

I think the kit comes with pinion support bearings for both the 5pm and 6mm shafts

[AnTi Taco]

Originally Posted by fusionbrad

I think the kit comes with pinion support bearings for both the 5pm and 6mm shafts

yup but only comes with 5mm pinions witch it weird


does anyone know if the fusion has the motor shaft bearing support like the compass heli's?

i thought i saw in one of the few photos of the fusion that the motor shaft was supported like compass does and i this logo does it too

[AnTi Taco]

talk to helidirect the .08 mod pinion will be in stock when the kits come

[OUTRAGE RC]

all pinions 12-16T 0.8M both 5mm and 6mm will be available at release date Feb 6.

Best regards,

www.outragerc.com

[Mystic3D]

Originally Posted by OUTRAGE RC

all pinions 12-16T 0.8M both 5mm and 6mm will be available at release date Feb 6.

Best regards,

www.outragerc.com

The 6mm Mod .8M must be custom made as I searched for an hour for a source and could not find anything less than 22T.

[Greg Alderman]

Here are the part numbers for 6mm pinions that will be available.

Price is $3.99 USD

HR1179-12SS: Steel Pinion 12T 0.8M (6mm shaft) (2pcs)
HR1179-13SS: Steel Pinion 13T 0.8M (6mm shaft) (2pcs)
HR1179-14SS: Steel Pinion 14T 0.8M (6mm shaft) (2pcs)
HR1179-15SS: Steel Pinion 15T 0.8M (6mm shaft) (2pcs)
HR1179-16SS: Steel Pinion 16T 0.8M (6mm shaft) (2pcs)

[im4711]

Thanks Greg -> that info will be helpful for may of the new owners.

[akamullen]

Have not seen a 15t 5mm yet? anyone seen one?

Also.. Greg, any idea when you will be getting the 4025-550 with a 5mm shaft in stock? need one to complete my fusion. I see you guys have the 6mm, which I would grab but oos.. Would rather grab a 5mm shaft as then I can leave the pinion support bearing as is..
Thanks....

[jbradley3]

http://www.helidirect.com/hr117815ss...cs-p-22156.hdx

[Greg Alderman]

Originally Posted by akamullen

Have not seen a 15t 5mm yet? anyone seen one?

Also.. Greg, any idea when you will be getting the 4025-550 with a 5mm shaft in stock? need one to complete my fusion. I see you guys have the 6mm, which I would grab but oos.. Would rather grab a 5mm shaft as then I can leave the pinion support bearing as is..
Thanks....

I do not have a time frame yet for receiving more motors from Scorpion, then have no idea when dealers will place an order from us. I work for Prestige RC and Outrage, not for a specific dealer that sells to retail customers. So I really dont have an idea when your local dealer will have that motor back in stock...Sorry.