Register Now

RacingJake · 09-03-2013, 01:27 PM

Had a few hard landings and hit a few things

nothing that 25 bucks didn't fixed in the first 60 flights. Last 40 flights have been mishap free.

So here's my replacement parts list at 100 flights, I guess that's not too bad ?

Set of main blades
one flybar rod
one blade holder
landing gear
servor gear

PS. I named my bird the lawn mower cause she can cut !!!

BorgeBorge · 09-03-2013, 02:17 PM

Thats not bad at all!

What helicopter is it?

RacingJake · 09-03-2013, 03:24 PM

Oops, KDS 450 QS

abwomack · 09-09-2013, 04:40 PM

when you get a chance

RacingJake · 09-11-2013, 05:35 PM

The oneway bearing started slipping today and I ordered a few more. I have about 13 hours of flying along with a few hard landings so I guess that's not to bad.

Starting to learn nose in flying today before the bearing let go and man what a feeling

Ghostflyer1 · 09-15-2013, 03:23 PM

Very NICE!!!!!

:

RacingJake · 09-19-2013, 08:08 PM

Replaced the oneway bearing shaft today with a new one and no more slipping then grabing causing stripped teeth on the main drive gear.

Here's a pic of the worn one with .003 wear after 13 hours. Now I did have a few hard side landings and hit a few things so that may of caused more wear too ?

That's the only time change item for me so far as long as I don't hit anything else

09-03-2013, 01:27 PM	#1 (permalink)
RacingJake Registered Users Join Date: Jul 2013	100th Flight today Had a few hard landings and hit a few things nothing that 25 bucks didn't fixed in the first 60 flights. Last 40 flights have been mishap free. So here's my replacement parts list at 100 flights, I guess that's not too bad ? Set of main blades one flybar rod one blade holder landing gear servor gear PS. I named my bird the lawn mower cause she can cut !!!

09-03-2013, 02:17 PM	#2 (permalink)
BorgeBorge Registered Users My HF Map location Join Date: Nov 2007	Thats not bad at all! What helicopter is it? __________________ TRCHK

09-09-2013, 04:40 PM	#4 (permalink)
abwomack Registered Users My HF Map location Join Date: Apr 2007	lets see a few pics when you get a chance __________________ Allen Womack / KDS Models USA 713-475-5855 www.kdsmodelsusa.com

09-15-2013, 03:23 PM	#6 (permalink)
Ghostflyer1 Registered Users My HF Map location Join Date: Feb 2010	Very NICE!!!!! : __________________ GhostFlyer1 KDS Dual Innova 700's, Innova 450,, and to many others to list

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-03-2013, 03:24 PM	#3 (permalink)
RacingJake Registered Users Thread Starter Join Date: Jul 2013	Oops, KDS 450 QS

09-11-2013, 05:35 PM	#5 (permalink)
RacingJake Registered Users Thread Starter Join Date: Jul 2013	The oneway bearing started slipping today and I ordered a few more. I have about 13 hours of flying along with a few hard landings so I guess that's not to bad. Starting to learn nose in flying today before the bearing let go and man what a feeling

09-19-2013, 08:08 PM	#7 (permalink)
RacingJake Registered Users Thread Starter Join Date: Jul 2013	Replaced the oneway bearing shaft today with a new one and no more slipping then grabing causing stripped teeth on the main drive gear. Here's a pic of the worn one with .003 wear after 13 hours. Now I did have a few hard side landings and hit a few things so that may of caused more wear too ? That's the only time change item for me so far as long as I don't hit anything else

Register Now

Log-in