Register Now

DaFedMan · 02-01-2012, 12:23 PM

I was wondering if someone could point me in the direction of the connectors used on the HV TORQ 9180s. I broke one of the black pins holding the connection and am trying to find replacements. I sent an email to Outrage RC, but no response so far.

DominicD · 02-01-2012, 12:27 PM

I don't recall which ones the pins are compatible with but when you do find out

http://servocity.com/html/servo_connectors___pins.html

backburner1955 · 02-01-2012, 02:16 PM

They are the same as JR servo connectors. I broke one, and just took an end off of a JR servo extension that I had around and it worked.

DaFedMan · 02-01-2012, 03:33 PM

I tried a jr servo connector, but the connectors for Outrage servo won't slide in all the way in. The gold connectors seem larger on the TORQ servos.

DaFedMan · 02-02-2012, 08:34 PM

Just to update everyone, Bob from Outrage RC contacted me and put me in touch with their U.S. distributer Prestige RC. Prestige RC was nice enough to send me a connector free of charge. I inquired as to a part number for future reference. He informed me that he was working with Outrage to try to get a number of the connectors for their customers. Just to let everyone that service was prompt and over the top by both individuals. They actually removed a connector from an extra unit they had used as a display.

02-01-2012, 12:23 PM	#1 (permalink)
DaFedMan Registered Users Join Date: Feb 2011	TORQ Servo Connectors I was wondering if someone could point me in the direction of the connectors used on the HV TORQ 9180s. I broke one of the black pins holding the connection and am trying to find replacements. I sent an email to Outrage RC, but no response so far.

02-01-2012, 12:27 PM	#2 (permalink)
DominicD The Capi My HF Map location Join Date: Oct 2006	I don't recall which ones the pins are compatible with but when you do find out http://servocity.com/html/servo_connectors___pins.html __________________ Spreading capibara awareness since 2006

02-01-2012, 02:16 PM	#3 (permalink)
backburner1955 Registered Users Join Date: Mar 2010	They are the same as JR servo connectors. I broke one, and just took an end off of a JR servo extension that I had around and it worked. __________________ *Bryan* AMA# 982814 *"No-Neck R/C"*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-01-2012, 03:33 PM	#4 (permalink)
DaFedMan Registered Users Thread Starter Join Date: Feb 2011	I tried a jr servo connector, but the connectors for Outrage servo won't slide in all the way in. The gold connectors seem larger on the TORQ servos.

02-02-2012, 08:34 PM	#5 (permalink)
DaFedMan Registered Users Thread Starter Join Date: Feb 2011	Just to update everyone, Bob from Outrage RC contacted me and put me in touch with their U.S. distributer Prestige RC. Prestige RC was nice enough to send me a connector free of charge. I inquired as to a part number for future reference. He informed me that he was working with Outrage to try to get a number of the connectors for their customers. Just to let everyone that service was prompt and over the top by both individuals. They actually removed a connector from an extra unit they had used as a display.

Register Now

Log-in