START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
450 PRO Class Electric Helicopters 450 PRO Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
04-14-2012, 02:27 PM | #181 (permalink) |
Registered Users
Join Date: Apr 2007
|
I am reading mixed reviews about the DFC head designs. How will it perform on the 450?
__________________
Mathias Lynx Oxy 3 | JR XG14 Last edited by Mathias; 04-14-2012 at 03:30 PM.. |
Sponsored Links | |||
Advertisement |
|
04-19-2012, 09:54 PM | #182 (permalink) |
Registered Users
Join Date: Mar 2011
|
I use the module XYZ tarot, but somewhat impaired in tailnya wagging, I use a servo D9257 tarot, please help me
|
06-10-2012, 09:56 AM | #183 (permalink) |
Registered Users
Join Date: Apr 2007
|
What general settings are you guys on with the Mini VStabi V5.1./2.3 on the 450 Pro? I am thinking main rotor style, agility, gyro gain, tail rotor yaw rate and gyro gain... Preferably for 3D flight.
Thanks,
__________________
Mathias Lynx Oxy 3 | JR XG14 |
06-10-2012, 12:45 PM | #184 (permalink) | |
Registered Users
Join Date: May 2011
|
Quote:
__________________
Nano CPx, Hirobo Quark 250 SE, Pro Upper Frame, Talon25, KDE, KST215, DS95i, Mini Vbar 450 Pro (6s), KDE, Lynx, Tarot, RJX, YEP40, KST215 & 515, SK540 465 (6s), Align DFC, HW50AV3, KST315 & 8910A+, SK720BE |
|
06-30-2012, 01:48 PM | #185 (permalink) | |
Registered Users
Join Date: Mar 2012
|
Quote:
__________________
Always thanks for the help much appreciated makes the hobby alot easier and enjoyablesince i began flying in dec.2011 |
|
07-14-2012, 10:18 AM | #186 (permalink) |
Registered Users
Join Date: Apr 2007
|
What advice are you looking for?
__________________
Mathias Lynx Oxy 3 | JR XG14 |
07-14-2012, 10:23 AM | #187 (permalink) |
Registered Users
Join Date: Mar 2012
|
Setting up a trex 450 pro with 5.2 mini va bar DFC head i spooled her up and the tail spun.. i went back last night and adjust gain setting . goin to ckeck it in few minutes in driveway try to hover it.. but mainly i just put the first page settings where it says for a 450 etc. i also used the bert kammerer video to help center all the subs trims and travels etc. so let you know asap. I'am not a 3 d flyer just mild loops rolls etc.
__________________
Always thanks for the help much appreciated makes the hobby alot easier and enjoyablesince i began flying in dec.2011 |
07-24-2012, 06:53 PM | #188 (permalink) |
Registered Users
Join Date: Apr 2007
|
Anyone here using Thunder Power 325 (335) mm blades with FBL configurations? I am running them myself and I am wondering how they compare to FBL blades like Edge 325 mm.
__________________
Mathias Lynx Oxy 3 | JR XG14 |
07-24-2012, 09:53 PM | #189 (permalink) |
Registered Users
Join Date: Mar 2012
|
Blades
Hi mathias..iam just using the align white blades standard 325 mm work good for me . Also the tsil problem was fixed went to my lhs and we downloaded the 5.3 again mini v bar. There was a issue on my setup program where the mount sensor page would not display the four pictures so i could not select one. So thats fixed. And i flew it and its ok kinda not used to it ,, little tuning should help , i might try the precise setting.
Thanks
__________________
Always thanks for the help much appreciated makes the hobby alot easier and enjoyablesince i began flying in dec.2011 |
08-10-2012, 02:04 PM | #190 (permalink) |
Registered Users
Join Date: Jul 2009
|
The thing with blades is that it is personal feel. You really have to get a pair that you are looking at and feel for your self.. I run the EDGE 325mm FBL blades on my 450pro and for me they feel good, but that is me. You may not like them at all.. As I said, It's a personal feel..
__________________
Blade MSR, MCPX v2 & 400 3D NightRig Align Trex450 pro. Align Trex700LE N. SAB Goblin 700Comp. |
08-10-2012, 02:42 PM | #191 (permalink) |
Registered Users
Join Date: Mar 2012
|
Sounds like a good statement to me to .
I will try the edge blades when i get a chance to buy them I think there more money but try em out anyhow. Tues i get new 450 pro dfc and a700 to follow dfc hv ) So time to rotate few older 450 etc ok ciao!!
__________________
Always thanks for the help much appreciated makes the hobby alot easier and enjoyablesince i began flying in dec.2011 |
08-22-2012, 11:02 AM | #192 (permalink) |
Registered Users
|
My 450 Pro Setup
Hi all,
Knowing how often in the past i've scoured the web for suitable settings for my heli, I thought i'd post mine in case they come in useful to anyone... Firstly, a disclaimer: I am still learning to fly my 450 Pro, and so these settings are what is currently working - for me - I know they won't be everyone's cup of tea. And so...my setup is as follows: Trex 450 Pro DFC Head (Trueblood dampers) CopterX 3X1000 FBL Controller (same as Tarot ZYX) Align 430XL Motor (3700kv) Rhino 10T Pinion - set for around 2400 Headspeed Align 35A Esc 6 Channel OrangeRC receiver with Spektrum Satellite DS410M cyclic servos DS520 Tail servo Align carbon blades / KBDD Tail Blades Turnigy 2200 Packs DX8 The attached files are for the FBL Controller and DX8. This setup gives me around 10mins flight time per lipo to the 80% rule, although my timer is set for 7mins. My flying at the moment includes FFF, circuits and stall turns. I hope someone finds this info of use... |
08-22-2012, 02:19 PM | #193 (permalink) |
Registered Users
Join Date: Jul 2009
|
I have finally finished the FBL conversion on my pro and loving it. It was fast before, but this is a hole different mini beast now. Got even the blue light on the BeastX on 6deg setup point
My setup is as follows:
With the setup above and the governer set to 3200rpm this thing flies straight and true and tracks excellent in the air. Flight time went from 3min to 4min(Flybar vs FBL) The heli flies now with no surprising moves when doing a maneuver, tail is rock solid and is a big confidence booster. It does what I tell in to do and nothing else My 700N is getting the BeastX treatment next season for sure..
__________________
Blade MSR, MCPX v2 & 400 3D NightRig Align Trex450 pro. Align Trex700LE N. SAB Goblin 700Comp. |
10-10-2012, 12:36 AM | #194 (permalink) |
Registered Users
|
Wow 65amps peak and 35 average, I didn't know the 3 cell setups were that much of a difference from my 6cell. I just purchased an align 450DFC combo kit and swapped out the stock power setup for a 1700kv motor with the ICE 50 Lite and 1300mah 6s 35c packs. I am running a governed 3200 headspeed with a slanted 12T pinion and a 121T main gear and my max amperage hits 26amps once or twice but averages 5-6 amps flying a somewhat mild 3D flight with a lot of pitch pumps and big air. All this will give me a sound 6 minute flight while coming back with only 77-80 percent of the pack used. I normally put back 925-990 mah into the packs. Another advantage i have found with the 6s setups is that you have a stronger punchout with no bogging due to the voltage staying very linear though out the flight.
|
10-22-2012, 11:13 AM | #195 (permalink) |
Registered Users
Join Date: May 2009
Location: Jacksonville, FL
|
f
I wasn't sure how to search for this...
I have the TREX 450 Pro V2 3GX (v2.1). The heli spun rapidly (rudder) as I took off from the ground. It had previously flew fine. I had just rewired it with the 3GX unit mounted upside down in the frame and I didn't redo the rudder setup again. I did the rudder setup again and it seemed fine. However, I noticed that if I turn on the TX, then the heli - if I flip the Aux switch from Head hold to rate and then back to Head hold - the rudder sticks to one side and will no longer move freely (left and right) as when I first turned it on (sitting on the ground) with throttle hold on. I'm using a DX7 (not DX7S) and I have my tail gyro gain set at +48 in the up position (Aux). The down position is -40. If I don't flip the switch at all and just leave it up at +40 it flies great. I was just wonding if this is a know issue? I could see if the setting wasn't right when I use it with the switch in the down position, but why would it lock the rudder after switching back to what is set correctly. What again is the gyro gain range for rate/head hold with the DX7 and 3GX? I thought Head Hold was over 50, but under 50 is holding the tail great. Thanks. |
12-10-2012, 06:04 AM | #196 (permalink) |
Registered Users
Join Date: Nov 2011
|
Hi.
Im kind of a nobe, just update my 3gx to 3.0 and having problems with my 450. It spinns round when I try to fly. Have tryed to set different rudder settings in from pc, but it still spinns around. Any tips or trix how to solve? Vill try looking for answers in the forum.
__________________
Just another freak Align 450pro/Mini Vbar 5.3pro/YGE 40/ Futaba 14SG. Align 550 Mini Vbar 5.3 pro/YGE 120LV Futaba 14SG. 2 x Align 700 DFC pro / V-bar 5.3 pro/CC 160HV/Scott gray reactorHVX/Futaba 14SG. |
12-10-2012, 12:39 PM | #197 (permalink) | |
Registered Users
Join Date: Jul 2009
|
Quote:
__________________
Blade MSR, MCPX v2 & 400 3D NightRig Align Trex450 pro. Align Trex700LE N. SAB Goblin 700Comp. |
|
10-23-2014, 04:41 AM | #199 (permalink) |
Registered Users
Join Date: Oct 2014
|
Can anyone help me leveling my swashplate on my trex450 plus dfc whit 3gx mrs and align t6 radio. I just not understand what I do wrong. I do just like they do on youtube
|
10-24-2014, 05:20 AM | #200 (permalink) | |
Registered Users
Join Date: Jul 2012
Location: Virginia Beach
|
Quote:
Are those photos at different levels of collective(throttle)? If so then first make sure in the radio your DR for each servo is set the same at 100%. Mine has a little differ eve like that due to some servo inequality. It's never caused any flight issues. Not sure if that can be dialed out. Awaiting other more intelligent pilots input. Sent from my iPad using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
|