Register Now

4503D · 11-23-2013, 07:26 AM

I have been using the same 4 batteries which came with the nano from new. Its been a year now using the same batteries, I normally use them all withon an hour of charging them and have now noticed that when I first spool up that the nano seems to loose power and then comes on again once I keep moving the throtttle stick. Is.this meaning its time.to replace batteries.or is something else wrong.on the helicopter

terryv83 · 11-23-2013, 04:06 PM

If you haven't tried replacing the main motor, try that first then new batteries.

kingmeow · 11-23-2013, 09:25 PM

It could be your 3n1. That's what happened to me. It's the intermittent contact of the chip(s) on the 3n1 board. Once I replaced the board the problem went away. Different batteries, old and new, didn't fix the problem

4503D · 11-24-2013, 02:13 PM

Had thought it may be the board or the motor. Time to take the heli apart I think.

number_nine · 11-25-2013, 01:54 PM

I had the same issue and it was my batteries.

11-23-2013, 07:26 AM	#1 (permalink)
4503D Registered Users Join Date: Aug 2013	replacing batteries I have been using the same 4 batteries which came with the nano from new. Its been a year now using the same batteries, I normally use them all withon an hour of charging them and have now noticed that when I first spool up that the nano seems to loose power and then comes on again once I keep moving the throtttle stick. Is.this meaning its time.to replace batteries.or is something else wrong.on the helicopter

11-23-2013, 09:25 PM	#3 (permalink)
kingmeow Registered Users Join Date: Jul 2011	It could be your 3n1. That's what happened to me. It's the intermittent contact of the chip(s) on the 3n1 board. Once I replaced the board the problem went away. Different batteries, old and new, didn't fix the problem __________________ Llama v3, EXI 450 Pro, Nano CPX, 130X, Protos 500, various planks Futaba 8FGH, Spektrum DX7s 18-channel scratch built tugboat controlled by modified Futaba Tx R/C junkie for the past 25 years and counting...

11-25-2013, 01:54 PM	#5 (permalink)
number_nine Registered Users Join Date: May 2013	I had the same issue and it was my batteries. __________________ Nano CPx, 130x, 350 QX, DX-Nine

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-23-2013, 04:06 PM	#2 (permalink)
terryv83 Registered Users Join Date: Jan 2009	If you haven't tried replacing the main motor, try that first then new batteries.

11-24-2013, 02:13 PM	#4 (permalink)
4503D Registered Users Thread Starter Join Date: Aug 2013	Had thought it may be the board or the motor. Time to take the heli apart I think.

Register Now

Log-in