Raptor 90 servos and gyro ?

[JayTee]

can someone direct me to an affordable servo and gyro for the Raptor 90.

I fly very very basic, no 3d.

I have a JR 9503 and 6 volt battery

Thanks in advance.

JT

[Phaedrus]

Originally Posted by JayTee

can someone direct me to an affordable servo and gyro for the Raptor 90.

I fly very very basic, no 3d.

I have a JR 9503 and 6 volt battery

Thanks in advance.

JT

What kind of price range do you have in mind? Budget covers a lot of ground.

Just for reference this is how I am doing the R90SE I have on the bench.
I am building it for F3C style (precision aerobatics) and not 3D.

I've already gotten the electronics and will use a Futaba GY611 w/9256, a GV-1 governor, Fromeco Arizona regulator, 2S Li-Ion pack, along with a YS91ST and Hatori pipe.

For servos I will use a Futaba 9252 for throttle and a Futaba 9157 for collective. I have both sitting here and want to put them to use. I just ordered two Futaba brushless 252 servos for cyclic control.

I am also planning on using one of the SwitchGlo onboard glow igniters. I'm using one on my little Raptor 50 and really like it. No more messing with the glow starter.

[JayTee]

Thanks alot< I may just copy you....


Way too much to learn!!

thanks a mil!

[Phaedrus]

Originally Posted by JayTee

Thanks alot< I may just copy you....


Way too much to learn!!

thanks a mil!

My set up is a little out there due to having the servos I plan to use laying around along with the gyro and governor. But it still comes down to what your budget really.

[freperry]

I would recommend Align DS610 Servos for cyclic and a Futaba 3151 or similar for throttle.
The DS610 are great servos which can be run straight on 2S Lipos. Check out the for sale section you can find them there all the time for a good price.
Gyro and tail servo.... many out there ... Spartan, GY611 (price for used ones are good), GY601 even cheaper, Logictech 6100 combo. The choice is yours and if you are not planning hard 3D even a GY401 would work in a 90.