14 SG telemetry alarm

[maarset]

I have a 14 SG and using the efuelgauge. I've seen there is a way to zero out the mah reading so that you can turn off the alarm without losing your cumulative mah reading. You assign a switch that sets the telemetry mah reading to zero. Anyone know how to do this with a 14SG? Been searching the net and can't find any info.

Mike

[Frequency]

I stumbled across this today, http://www.rcgroups.com/forums/showt...1919818&page=2

that guy should be able to help you.

[maarset]

I was going to try not to bother Thomas about it. I was hoping others were using the sensor and figured out how to turn the alarm off.

[maarset]

Just in case someone else is looking to do this.

"Enter Lnk/FUNCTION menu, roll to end, and assign a switch to the Dg1 channel. "

[maarset]

And it won't work properly till your telemetry reading goes over 20 mah. If you hit the switch to zero out your mah when you have a reading below 20 the telemetry reading shows 32,000 and your alarm goes off. Weird.

[dkpodder]

Thats a 'by design' feauture, for not taking off with disabled mah Count.

[maarset]

Is there a way by chance to show the telemetry readings and Timer on one screen?

[dkpodder]

Originally Posted by maarset

Is there a way by chance to show the telemetry readings and Timer on one screen?

Don't think it can be done (on the current firmware), but the T18MZ has this feature.

[maarset]

OK thanks buddy!