Fun, Learning, Friendship and Mutual Respect START  HERE
Register FAQ PM Events Groups Blogs Calendar Mark Forums Read


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Kontronik Drives
Reload this Page Jive Pro announced - release info


Kontronik Drives Jazz and Jive ESC's and other Kontronik equipment support


Reply
Page 1 of 2 1 2
 
LinkBack Thread Tools Display Modes
Old 07-14-2014, 08:15 AM   #1 (permalink)
Registered Users
 
Posts: 4,561
 
My HF Map location
Join Date: Aug 2008
Default Jive Pro announced - release info
Its finally here, July the 28th is when all back orders will start to ship.

All back orders will be shipped within 2-3 weeks.

All new orders will be approx 6 weeks due to huge demand.




It utilises the Kosmik architecture so will feature the following

5-8v BEC
8a continuos - 20a peak
LVC 2.7v-3.5v adjustable in 0.1v steps
Spool up adjusable from 8s - 60s
5s - 12s compatible
120HV and 80HV versions available
Same GOV as used in the Kosmik
Autorotation/Bailout mode
Switch when no receiver signal adjustable from 1-4s

All mode programming is done in the same way as with the Kosmik.
__________________
The difference between knowing your s**t and knowing you're s**t!
Optipower - Kontronik Drives
Last edited by jamin_00; 07-17-2014 at 06:07 AM..
jamin_00 is offline        Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 07-14-2014, 08:37 AM   #2 (permalink)
Registered Users
 
My HF Map location
Join Date: Nov 2009
Default
Alright, any word on US pricing?
__________________
GimpyGolden is offline        Reply With Quote Quick reply to this message
Old 07-14-2014, 08:48 AM   #3 (permalink)
Registered Users
 
Posts: 4,561
Thread Starter Thread Starter
 
My HF Map location
Join Date: Aug 2008
Default
Just waiting for confirmation but expect it to be around the current Helijive pricing.
__________________
The difference between knowing your s**t and knowing you're s**t!
Optipower - Kontronik Drives
jamin_00 is offline        Reply With Quote Quick reply to this message
Old 07-14-2014, 09:52 AM   #4 (permalink)
Registered Users
 
Posts: 22
 

Join Date: Nov 2012
Default
The Jive Pro 120HV will retail at the same price as the HeliJive - €479.99

The Jive Pro 80HV will retail at €20 more than the current Jive 80HV €349.99


These prices are inclusive of German VAT @19%. For international customers this is not applicable.

Please contact us at info@kontronik.com or contact your local dealer for specific pricing in your region.
__________________
We electrify you!!
KONTRONIK is offline        Reply With Quote Quick reply to this message
Old 07-14-2014, 11:09 PM   #5 (permalink)
Registered Users
 
Posts: 12,482
 
My HF Map location
Join Date: Sep 2007
Default
Does it come with a heatsink and programming cable for PC?
__________________
Henseleit TDR, TDR2, TDF, TDS, TDSF
Kontronik, Scorpion ESC, iChargers, VBar,
VControl
Old hand at Planks
Peter
Vinger is offline        Reply With Quote Quick reply to this message
Old 07-15-2014, 03:15 AM   #6 (permalink)
Registered Users
 
Posts: 1,303
 
My HF Map location
Join Date: Jul 2008
Location: Melbourne, Victoria, Australia
Default
No further news yet of the Futaba TelMe I suppose?
This supposedly soon after the Jive Pro.
Andy
AndrewJHawes is offline        Reply With Quote Quick reply to this message
Old 07-15-2014, 07:03 PM   #7 (permalink)
Registered Users
 
Posts: 1,689
 

Join Date: Jun 2010
Default
Since the new Jive Pro's will have the same gov as the Kosmic line, will the throttle curve % be set at 80 and not 65% like the original Jives?
__________________
Team Rotorquest/ SAB Heli Canada
mtymyk is offline        Reply With Quote Quick reply to this message
Old 07-15-2014, 07:32 PM   #8 (permalink)
Registered Users
 
My HF Map location
Join Date: Nov 2009
Default
Good Q Mike. My guess 80 same as Kos.
See ya next weekend bud.
__________________
GimpyGolden is offline        Reply With Quote Quick reply to this message
Old 07-15-2014, 08:44 PM   #9 (permalink)
Registered Users
 
Posts: 1,689
 

Join Date: Jun 2010
Default Re: Jive Pro announced - release info
Quote:
Originally Posted by GimpyGolden View Post
Good Q Mike. My guess 80 same as Kos.
See ya next weekend bud.
For sure Scott, can't wait!
__________________
Team Rotorquest/ SAB Heli Canada
mtymyk is offline        Reply With Quote Quick reply to this message
Old 07-15-2014, 09:35 PM   #10 (permalink)
Registered Users
 
Posts: 3,321
 

Join Date: May 2011
Default
Quote:
Originally Posted by GimpyGolden View Post
Good Q Mike. My guess 80 same as Kos.
See ya next weekend bud.
yea same architecture so same numbers as the Kosmik and Koby
__________________
Richard Zappe
Team Kontronik USA PeakAircraft
Wh1teAfr1can is offline        Reply With Quote Quick reply to this message
Old 07-16-2014, 09:56 AM   #11 (permalink)
Registered Users
 
Posts: 726
 

Join Date: Feb 2012
Default
Quote:
Originally Posted by GimpyGolden View Post
Alright, any word on US pricing?
HeliDirect has Jive Pro's listed!

Jive pro 80HV $419.99
Jive pro 120HV $569.99
__________________
CN#139
GOBLIN 500- HeliJive 120, Pyro 600-12, BK Servo
GOBLIN BLACK NITRO YS 96 SRX Tareq, Torq, BK
-G's is offline        Reply With Quote Quick reply to this message
Old 07-16-2014, 04:51 PM   #12 (permalink)
Registered Users
 

Join Date: Dec 2010
Default
Quote:
Originally Posted by jamin_00 View Post
Its finally here, July the 28th is when all back orders will start to ship.

All back orders will be shipped within 2-3 weeks.

All new orders will be approx 6 weeks due to huge demand.




It utilises the Kosmik architecture so will feature the following

5-8v BEC
8a continuos - 20a peak
LVC 2.7v-3.5v adjustable in 0.1v steps
Spool up adjusable from 8s - 60s
4s - 12s compatible
120HV and 80HV versions available
Same GOV as used in the Kosmik
Autorotation/Bailout mode
Switch when no receiver signal adjustable from 1-4s

All mode programming is done in the same way as with the Kosmik.
Where did you get 4S -12s compatible?

I do wish that were true, but Specs on kontronik website states 5S -12S compatible
__________________
Logo 480 XXtreme, Logo 550SX, Logo 690SX, Logo 800 XXtreme, TDR, Minicopter Diabolo 550, Minicopter Triabolo, Goblin 500, Goblin 700, Goblin 770, KDS Agile 5.5, Voodoo 600, Voodoo 400, HD Cell 500, Thunder Tiger E700
Last edited by taosgraveyard; 07-16-2014 at 07:31 PM..
taosgraveyard is offline        Reply With Quote Quick reply to this message
Old 07-17-2014, 04:04 AM   #13 (permalink)
Registered Users
 
Posts: 4,561
Thread Starter Thread Starter
 
My HF Map location
Join Date: Aug 2008
Default
Its the pre release info I was given.

If it says 5s-12s on their site then that is the case as this will obviously surpass any pre release info.
__________________
The difference between knowing your s**t and knowing you're s**t!
Optipower - Kontronik Drives
jamin_00 is offline        Reply With Quote Quick reply to this message
Old 07-17-2014, 02:18 PM   #14 (permalink)
Registered Users
 

Join Date: Dec 2010
Default
Since they haven't announced a LV pro, I was hoping 4S was going to be the spec... But all sites that have listings say 5S

Which bums me out a little,
__________________
Logo 480 XXtreme, Logo 550SX, Logo 690SX, Logo 800 XXtreme, TDR, Minicopter Diabolo 550, Minicopter Triabolo, Goblin 500, Goblin 700, Goblin 770, KDS Agile 5.5, Voodoo 600, Voodoo 400, HD Cell 500, Thunder Tiger E700
taosgraveyard is offline        Reply With Quote Quick reply to this message
Old 07-17-2014, 02:36 PM   #15 (permalink)
Registered Users
 
Posts: 4,561
Thread Starter Thread Starter
 
My HF Map location
Join Date: Aug 2008
Default
Never mind

Not the end of the world, worse things happen at sea
__________________
The difference between knowing your s**t and knowing you're s**t!
Optipower - Kontronik Drives
jamin_00 is offline        Reply With Quote Quick reply to this message
Old 07-18-2014, 10:54 AM   #16 (permalink)
Registered Users
 

Join Date: Dec 2010
Default
Ii was elated when I read your post ... wanted it to be 4S for a new voodoo 400 running HV servos...

Don't want the weight of BEC or RX pack, so will run them at 6 volts and use jive 100 LV BEC

Oh well...
__________________
Logo 480 XXtreme, Logo 550SX, Logo 690SX, Logo 800 XXtreme, TDR, Minicopter Diabolo 550, Minicopter Triabolo, Goblin 500, Goblin 700, Goblin 770, KDS Agile 5.5, Voodoo 600, Voodoo 400, HD Cell 500, Thunder Tiger E700
taosgraveyard is offline        Reply With Quote Quick reply to this message
Old 07-18-2014, 12:03 PM   #17 (permalink)
Registered Users
 
Posts: 3,321
 

Join Date: May 2011
Default
Quote:
Originally Posted by taosgraveyard View Post
Ii was elated when I read your post ... wanted it to be 4S for a new voodoo 400 running HV servos...

Don't want the weight of BEC or RX pack, so will run them at 6 volts and use jive 100 LV BEC

Oh well...
A Koby 90 would be able to do that. gives you all of your requirements. As long as you have decent servos that dont have huge back emf it will run flawlessly.
__________________
Richard Zappe
Team Kontronik USA PeakAircraft
Wh1teAfr1can is offline        Reply With Quote Quick reply to this message
Old 07-18-2014, 03:22 PM   #18 (permalink)
Registered Users
 

Join Date: Dec 2010
Default
I have a requirement I forgot to share

Koby doesn't give me all of my requirements

Koby Doesn't support jlog... I am a jeti guy, like telemetry without extra sensors

100LV ( I have one I. The parts bin) gives me JLOG

No JLOG, that's a show stopper
__________________
Logo 480 XXtreme, Logo 550SX, Logo 690SX, Logo 800 XXtreme, TDR, Minicopter Diabolo 550, Minicopter Triabolo, Goblin 500, Goblin 700, Goblin 770, KDS Agile 5.5, Voodoo 600, Voodoo 400, HD Cell 500, Thunder Tiger E700
taosgraveyard is offline        Reply With Quote Quick reply to this message
Old 07-28-2014, 02:25 AM   #19 (permalink)
Registered Users
 
Posts: 4,561
Thread Starter Thread Starter
 
My HF Map location
Join Date: Aug 2008
Default
I have just put this info up

https://www.facebook.com/permalink.p...26153414275606
__________________
The difference between knowing your s**t and knowing you're s**t!
Optipower - Kontronik Drives
jamin_00 is offline        Reply With Quote Quick reply to this message
Old 07-28-2014, 10:15 PM   #20 (permalink)
Registered Users
 

Join Date: Feb 2007
Default
Will any vendors have the pro 80hv at IRCHA? If so, which ones? Please no guesses, just known information thx.
rick.007 is offline        Reply With Quote Quick reply to this message
Reply
Page 1 of 2 1 2



« Previous Thread | Next Thread »

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the HeliFreak forums, you must first register.
Please enter your desired user name, your REAL and WORKING email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
 Confirm Password:
Email Address
Please enter a valid email address for yourself. Use a real email address or you will not be granted access to the site. Thank you.
Email Address:
Location
Where do you live? ie: Country, State, City or General Geographic Location please.
Name and Lastname
Enter name and last name here. (This information is not shown to the general public. Optional)
Helicopter #1
Enter Helicopter #1 type and equipment.
Helicopter #2
Enter Helicopter #2 type and equipment.
Helicopter #3
Enter Helicopter #3 type and equipment.
Helicopter #4
Enter Helicopter #4 type and equipment.

Log-in


Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Copyright © Website Acquisitions Inc. All rights reserved.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Copyright - Advertising - Contact Us - HeliFreak.com - Privacy Statement - Top

SEO by vBSEO 3.6.1