Register Now

BigRich63 · 08-18-2014, 09:55 AM

Hi all,
Through a series of delays, repairs, and part replacements, I've forgotten which servos plugs go where. Some of the plug markings have worn off or are new and not marked. I have a version 1 board.
Thanks

NCcraig · 08-18-2014, 09:59 AM

All the boards are the same. Lookng at the back of the board, the servo connector on the lower left side goes to the servo on that side, the upper middle connector goes to the rear/elevator servo and the lower right goes to the servo on that side.

BigRich63 · 08-18-2014, 10:04 AM

Thanks Craig. Good to hear from you.

NCcraig · 08-18-2014, 10:12 AM

08-18-2014, 09:55 AM	#1 (permalink)
BigRich63 Registered Users Join Date: Jul 2012	Servo plug connections Hi all, Through a series of delays, repairs, and part replacements, I've forgotten which servos plugs go where. Some of the plug markings have worn off or are new and not marked. I have a version 1 board. Thanks

08-18-2014, 09:59 AM	#2 (permalink)
NCcraig Registered Users Join Date: Mar 2011	All the boards are the same. Lookng at the back of the board, the servo connector on the lower left side goes to the servo on that side, the upper middle connector goes to the rear/elevator servo and the lower right goes to the servo on that side. __________________ Team Newb pilot All my helis and quads were lost in a tragic boating accident.

08-18-2014, 10:12 AM	#4 (permalink)
NCcraig Registered Users Join Date: Mar 2011	__________________ Team Newb pilot All my helis and quads were lost in a tragic boating accident.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-18-2014, 10:04 AM	#3 (permalink)
BigRich63 Registered Users Thread Starter Join Date: Jul 2012	Thanks Craig. Good to hear from you.

Register Now

Log-in