Register Now

Lada1 · 09-25-2014, 01:19 AM

Is there any other difference in the features then my observed ones below?

Progdisc allows to set:
timing
freewheel
&update FW in the ESC´s

Bluetooth allows to set:
gear ratio
&realtime monitoring via the Kview application

ncampion · 09-25-2014, 08:42 AM

The only thing the BT can do is update the firmware as far as I've used to date. Progdisc is now obsolete awaiting new hardware/interface possible via the USB port on the Kosmik.

Wh1teAfr1can · 09-25-2014, 09:07 AM

Quote:

Originally Posted by ncampion

The only thing the BT can do is update the firmware as far as I've used to date. Progdisc is now obsolete awaiting new hardware/interface possible via the USB port on the Kosmik.

Progdisc will still be updated so wont be obsolete for a while.

Vinger · 09-25-2014, 03:23 PM

Can't buy a progdisc, so what do we use in the meantime?

Wh1teAfr1can · 09-25-2014, 03:37 PM

Quote:

Originally Posted by Vinger

Can't buy a progdisc, so what do we use in the meantime?

Bluetooth unit. The new hardware should be done shortly.

to answer other question above the usb port on the kosmik is for Kontronik use only for programming the board.

Excalibur3 · 09-25-2014, 04:35 PM

It's Def annoying that I need to buy a device to program my kosmik. I can't find a bluetooth modual or prog disk anywhere. Very frustrating

Trex700ProDFCHV,Goblin 770,Goblin 570, 14SGH

Vinger · 09-25-2014, 11:42 PM

Quote:

Originally Posted by Wh1teAfr1can

Bluetooth unit. The new hardware should be done shortly.

to answer other question above the usb port on the kosmik is for Kontronik use only for programming the board.

I have no need for the very expensive BT module, so yes frustrated to not be able to program Koby, JPro or Kosmik. For all my other Jives it is easy with the ProgCard 1 & 2 and that was not to expensive.

Any date for release as many a Kontronik buff has said after the Pro120 release which has been out for a month or longer already?

LARRY2716 · 09-28-2014, 01:58 PM

Either way they should not release a device, and not the hardware to change it's settings. They should at least kept the Progdisc going until something available to replace it!
Yes can always get up and going with just the stick programming, but if want to change some setting you should have the means to do so!

I have the Progdisc and glad bought it when I did. I got enough use out of it for the money, with two Jives and three Kobys.

09-25-2014, 01:19 AM	#1 (permalink)
Lada1 Registered Users Join Date: Oct 2012	Progdisc vs Bluetooth module Is there any other difference in the features then my observed ones below? Progdisc allows to set: timing freewheel &update FW in the ESC´s Bluetooth allows to set: gear ratio &realtime monitoring via the Kview application Last edited by Lada1; 09-25-2014 at 02:49 AM..

09-25-2014, 03:23 PM	#4 (permalink)
Vinger Registered Users My HF Map location Join Date: Sep 2007	Can't buy a progdisc, so what do we use in the meantime? __________________ Henseleit TDR, TDR2, TDF, TDS, TDSF Kontronik, Scorpion ESC, iChargers, VBar, VControl Old hand at Planks Peter

09-25-2014, 04:35 PM	#6 (permalink)
Excalibur3 Registered Users Join Date: Jul 2012	It's Def annoying that I need to buy a device to program my kosmik. I can't find a bluetooth modual or prog disk anywhere. Very frustrating Trex700ProDFCHV,Goblin 770,Goblin 570, 14SGH __________________ TREX 700 Pro, TREX 700LTop, GauiX3, Futaba 14SGH

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-25-2014, 08:42 AM	#2 (permalink)
ncampion Registered Users Join Date: Dec 2007	The only thing the BT can do is update the firmware as far as I've used to date. Progdisc is now obsolete awaiting new hardware/interface possible via the USB port on the Kosmik.

09-28-2014, 01:58 PM	#8 (permalink)
LARRY2716 Registered Users Join Date: Feb 2010	Either way they should not release a device, and not the hardware to change it's settings. They should at least kept the Progdisc going until something available to replace it! Yes can always get up and going with just the stick programming, but if want to change some setting you should have the means to do so! I have the Progdisc and glad bought it when I did. I got enough use out of it for the money, with two Jives and three Kobys.

Register Now

Log-in