New to Torq

[Van Scott]

I've just ordered a set of CL5180's for my 500's Cyclic and it just dawned on me there is no mention of included Mounting Hardware or Horns !
Are these parts included with the Torq Servos or do I need to order them as well ?

[rex09]

I got the same for my 500, they supply horns, but you would have to cut them down to a single arm, I brought the SAB ones, but they are very thick, so had to counter sink the screw head to clear the top part of the main Alu plate, to get the 18mm in instructions, really soild servo, with no back lash. I also got a 9288 to replace the 9188 that was damaged in a roll over
just waiting on a nice day to test fly/setup

[Van Scott]

Ended up just cutting down the supplied arms and was good to go. These Servo are like night and day compared to the Align DS515m.
Running with a BD3SX and have never felt so 'connected' to my 500.
Retired the DS515's at 400 flights and have 130 on the Torq which feel like they are just getting run-in. Zero slop or backlash , centre perfectly and come down virtually cold after whatever I throw at them.
I guess while swinging 425mm Blades they are doing it easy.
Very impressed !!

[rex09]

Originally Posted by Van Scott

Ended up just cutting down the supplied arms and was good to go. These Servo are like night and day compared to the Align DS515m.
Running with a BD3SX and have never felt so 'connected' to my 500.
Retired the DS515's at 400 flights and have 130 on the Torq which feel like they are just getting run-in. Zero slop or backlash , centre perfectly and come down virtually cold after whatever I throw at them.
I guess while swinging 425mm Blades they are doing it easy.
Very impressed !!

Flew mine with the new servos, flys like my Fusion with the MKS's in it, no more align servos for me (budget permitting) I got 2 years from the DS515's so can't complain, but no comparison to Trorq or MKS, not the same cost ether
Van where in Aus are you, I.m in Toowoomba Qld