Register Now

jadams · 06-08-2015, 08:25 AM

I am new to the Jive and tried searching for the info. I have a Jive 120 v13, futaba 14SG radio. If I set the throttle channel to "reversed" it won't arm or go into setup. Reverse the channel to "norm" and it arms. I thought Futaba has the throttle channel reversed? I'm in normal mode 0-100%, not sure what to set endpoints to. Any help would be appreciated.

Vinger · 06-08-2015, 10:58 AM

Download the manual and follow the programming steps. No need to reverse throttle. Watch the programming videos in the stikies as well.

Do a mode 1, which teaches endpoints to ESC and resets it, then program whatever mode you want after that.

jadams · 06-09-2015, 08:32 AM

did all that, the main issue is the throttle channel, wasn't sure if it had to be reversed.

Wh1teAfr1can · 06-09-2015, 09:37 AM

Quote:

Originally Posted by jadams

did all that, the main issue is the throttle channel, wasn't sure if it had to be reversed.

no the jive will learn.

jadams · 06-11-2015, 10:15 PM

Got it thanks! Just was puzzled because one of my HJ120"s throttle was normal and one was reversed.

06-08-2015, 08:25 AM	#1 (permalink)
jadams Registered Users Join Date: Apr 2007 Location: Upstate New York	Heli Jive 120 and Futaba Setup I am new to the Jive and tried searching for the info. I have a Jive 120 v13, futaba 14SG radio. If I set the throttle channel to "reversed" it won't arm or go into setup. Reverse the channel to "norm" and it arms. I thought Futaba has the throttle channel reversed? I'm in normal mode 0-100%, not sure what to set endpoints to. Any help would be appreciated.

06-08-2015, 10:58 AM	#2 (permalink)
Vinger Registered Users My HF Map location Join Date: Sep 2007	Download the manual and follow the programming steps. No need to reverse throttle. Watch the programming videos in the stikies as well. Do a mode 1, which teaches endpoints to ESC and resets it, then program whatever mode you want after that. __________________ Henseleit TDR, TDR2, TDF, TDS, TDSF Kontronik, Scorpion ESC, iChargers, VBar, VControl Old hand at Planks Peter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-09-2015, 08:32 AM	#3 (permalink)
jadams Registered Users Thread Starter Join Date: Apr 2007 Location: Upstate New York	did all that, the main issue is the throttle channel, wasn't sure if it had to be reversed.

06-11-2015, 10:15 PM	#5 (permalink)
jadams Registered Users Thread Starter Join Date: Apr 2007 Location: Upstate New York	Got it thanks! Just was puzzled because one of my HJ120"s throttle was normal and one was reversed.

Register Now

Log-in