Register Now

Nozer · 12-02-2011, 07:55 PM

Can it be done without any problems or issues?
I'm not interested in some wierd mods including the seasaw still in place...

what i most of all want to keep is the bladegrips and hub.
can i get parts to get this done, and what parts do i need?

/Tobbe

bad007 · 12-02-2011, 08:24 PM

Convert. Na get the Align FBL new head design and the shorter main shaft. Lowering the head makes it handle better

billmjam · 12-02-2011, 08:26 PM

+1, don't do any mods. They never work right. Buy a built for purpose FBL head. There are many manufacturers out there.

https://www.helifreak.com/attachment...5&d=1322150163

tcb2185 · 12-03-2011, 11:57 AM

it can be done and does work right i have done it...

tcb2185 · 12-03-2011, 11:59 AM

https://www.helifreak.com/showthread...26#post3412726

Link.

Ah Clem · 12-03-2011, 12:01 PM

You are better off replacing the entire head:

https://www.helifreak.com/showthread...ight=tracx+fbl

tcb2185 · 12-03-2011, 12:16 PM

Yes you are. but my link works too if you are on a Budget like i am.. i know.. Budget and RC helis don't go hand and hand but it does work.

bad007 · 12-03-2011, 02:46 PM

Quote:

Originally Posted by tcb2185

Yes you are. but my link works too if you are on a Budget like i am.. i know.. Budget and RC helis don't go hand and hand but it does work.

This is true but I hope you can afford to get a genuine FBL head setup someday, direct to swash is the only way to go. Huge difference

Nozer · 12-03-2011, 03:56 PM

Thanks for the input guys!

Ended up with ordering a RJX head instead.

/Tobbe

billmjam · 12-03-2011, 05:14 PM

Quote:

Originally Posted by Nozer

Thanks for the input guys!

Ended up with ordering a RJX head instead.

/Tobbe

Amen! You will be much happier!

tcb2185 · 12-04-2011, 06:23 AM

Quote:

Originally Posted by bad007

This is true but I hope you can afford to get a genuine FBL head setup someday, direct to swash is the only way to go. Huge difference

I will Just started a new job so im waiting for a Tracx to get back in stock! LOL

12-02-2011, 07:55 PM	#1 (permalink)
Nozer Registered Users Join Date: Feb 2009	convert org head to fbl? Can it be done without any problems or issues? I'm not interested in some wierd mods including the seasaw still in place... what i most of all want to keep is the bladegrips and hub. can i get parts to get this done, and what parts do i need? /Tobbe __________________ CopterX 500SE V2 \| BeastX v3 + RJX head \| CC ICE75 + Hyperion HS 3026-1600Kv \| JR DSX7 2.4Ghz EX helis: Trex450SE \| HBK2(blinged) \| Dragonfly FP \| Raptor 50SE

12-02-2011, 08:26 PM	#3 (permalink)
billmjam Registered Users Join Date: May 2011	+1, don't do any mods. They never work right. Buy a built for purpose FBL head. There are many manufacturers out there. https://www.helifreak.com/attachment...5&d=1322150163 __________________ TREX 500 DFC PRO , TREX 550E FBL V2, TREX 700E DFC, AR7200BX in all three, DX8 AMA #969521

12-03-2011, 12:01 PM	#6 (permalink)
Ah Clem Registered Users Join Date: Jan 2006	You are better off replacing the entire head: https://www.helifreak.com/showthread...ight=tracx+fbl __________________ KBDD-Team Captain, JR DFA Team Pilot. Forza 450, Forza 600N, Forza 700, Compass 6HV-U, Warp, 7HV,Knight Pro,Knight 3D, Atom, Odin II, 6HV, 3D Plus, Knight 50, Chronos, Velos, Steam 550 and 600, OMP M2 (and anything else I can get my hands on...).

12-03-2011, 03:56 PM	#9 (permalink)
Nozer Registered Users Thread Starter Join Date: Feb 2009	Thanks for the input guys! Ended up with ordering a RJX head instead. /Tobbe __________________ CopterX 500SE V2 \| BeastX v3 + RJX head \| CC ICE75 + Hyperion HS 3026-1600Kv \| JR DSX7 2.4Ghz EX helis: Trex450SE \| HBK2(blinged) \| Dragonfly FP \| Raptor 50SE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-02-2011, 08:24 PM	#2 (permalink)
bad007 Registered Users Join Date: Nov 2009	Convert. Na get the Align FBL new head design and the shorter main shaft. Lowering the head makes it handle better

12-03-2011, 11:57 AM	#4 (permalink)
tcb2185 Registered Users Join Date: Aug 2011	it can be done and does work right i have done it...

12-03-2011, 11:59 AM	#5 (permalink)
tcb2185 Registered Users Join Date: Aug 2011	https://www.helifreak.com/showthread...26#post3412726 Link.

12-03-2011, 12:16 PM	#7 (permalink)
tcb2185 Registered Users Join Date: Aug 2011	Yes you are. but my link works too if you are on a Budget like i am.. i know.. Budget and RC helis don't go hand and hand but it does work.

Register Now

Log-in